2. Product Overview
UCX series – User's Manual
15
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
2.2.
Rear View
UCX-2x1-HC30
UCX-2x2-H30
UCX-4x2-HC30
UCX-4x2-HC30D
1
3 4
5 6 7
8
9 q
2
1
3 4
5 6 7
8
9
2
RS-232
DC IN
24V 5A
GPIO
Tx1 Rx1
L
R
USB-A
USB-A
AUDIO OUT
OCS
SENSOR
IN
ETHERNET 1
ETHERNET 2
HDMI
OUT 1
OUT 2
HDMI
1
2
3
4
2 3 4 5 6
1
5V
24V
Tx2 Rx2
CONTROL LAN
SECURE
AV LAN
UTILITY
1
2
3 4
5 6 7
8
9 q
1
2
3 4
5 6
78
9
q
w
1
DC Input
The device can be powered by an external 120W power supply. Connect the
output to the 2-pole Phoenix
®
connector. For more info about the powering,
see
2
USB-A Port
Downstream ports for connecting USB peripherals (e.g. camera, keyboard,
multitouch display) with USB 3.1 Gen1 data speed.
3
HDMI Output Ports
HDMI output ports for connecting sink devices.
4
Video Output Status
LEDs
See the details in
section.
5
Analog audio port
5-pole Phoenix
®
connector for balanced analog audio output signal. The
signal is de-embedded from the selected video signal.
6
RS-232 port
3-pole Phoenix connector for bi-directional RS-232 communication.
#new
7
OCS sensor connector
3-pole Phoenix
®
connector (male) for connecting an occupancy
sensor. The port provides 24V output voltage (50mA), see the details in
section.
8
GPIO
8-pole Phoenix
®
connector for configurable general purpose.
Max. input/output voltage is 5V, see the details in
ATTENTION!
Occupancy sensor connector and GPIO port are not
compatible with each other because of the voltage level difference, please
do not connect them directly.
#new
9
Secure Control LAN
RJ45 connector for configurable 100Base-T Ethernet communication.
q
Utility AV LAN
RJ45 connector provides room utility Ethernet connection for e.g BYOD
laptops.
w
Dante
®
Audio Output
RJ45 connector for de-embedding the HDMI audio which can be
transmitted as a 2-channel Dante
®
or AES67 source.
WARNING!
Always use the supplied power supply. Warranty void if damage occurs due to use of a
different power source.