Lightware UBEX Series, Руководство пользователя

Страница: 80 / 201

8. Lightware Device Controller UBEX series – Matrix Application Mode – User's Manual 80 8. Lightware Device Controller UBEX series – Matrix Application Mode – User's Manual 80
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
HDMI Output Ports
INFO: The properties panel belongs to the local HDMI outputs of the transmitter.
Clicking on the HDMI output 1 or 2 port icon results in opens the Port properties. The most important signal
and display information and settings are available from the panel.
Available Settings and Tools
▪
HDCP mode
(Auto / Always); #hdcp
▪
Power 5V mode
(Auto / Always on / Always off); #power5v
▪ Frame Detector - The tool displays the frame information of the original stream coming from the input
port before a possible rescaling / frame rate conversion.
Stream Properties Panels
Clicking on the Stream 1 or Stream 2 panels on the transmitter side opens the properties of the video input
streams. The most important signal information and settings are available from the panel.
Endpoint tab of the Device properties window - Transmitter - Stream properties
Settings
▪
Stream naming
;
▪
Enabled
: when it is checked in, the stream is enabled; if it is not, the stream is muted. #streamenable
▪
Tile icon
: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
▪ Identify Stream / Identify Display . #identifystream #identifydisplay
Scaler Settings (only for the Stream of the HDMI in 1)
▪
Scaling mode
:
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the Resolutions of the Scaler / FRC section.
▪
Image position
(Stretch / Fit / Center)
▪
Color space conversion
(No conversion / RGB / YUV 4:4:4 / YUV 4:2:2).
▪ No Sync Screen (Test Pattern) .
Frame Rate Converter Settins (only for the Stream of the HDMI in 2)
▪
Output resolution mode
:
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the Resolutions of the Scaler / FRC
section.
▪
Color space conversion
(No conversion / RGB / YUV 4:4:4 / YUV 4:2:2);
▪ No Sync Screen (Test Pattern) .
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the Search Field .
#scaler #frc #csc #colorspace #testpattern #nosyncscreen #tag

  

  