manualshive.com logo in svg

Lightware UBEX-MMU-X200, Руководство пользователя, Страница: 34 / 253

Поделиться
Скачать
Lightware UBEX-MMU-X200 Скачать руководство пользователя страница 34

 

5. Installation 

series – Matrix Application Mode – User's Manual 

34

 

5. Installation 

series – Matrix Application Mode – User's Manual 

34

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

5.1. Mounting Options - F-series Endpoint Devices

Devices can be mounted in several ways, depending on the application. Besides using with rack shelf, a 

mounting bracket is available which offers easy mounting on truss systems with standard clamps. The 

bracket can be also used for building the unit into the furniture:

Mounting bracket V2

1U high rack shelf

WARNING! 

Always use the supplied screws. Using different (e.g. longer) ones may cause damage to the 

device.
ATTENTION! 

Pay attention to the ventilation holes when designing the system especially when the 

extender is built into/under furniture. Front and rear ventilation holes must not be covered. If a UBEX device 

is installed in a closed space, the designer shall provide satisfactory ventilation to prevent excessive heat 

build-up inside.
INFO: 

The endpoint device is half-rack sized.

To order mounting accessories please contact

 [email protected]

.

5.1.1. Mounting Bracket V2

Mounting bracket V2 gives an opportunity to mount the device to any furniture surface. Fasten the bracket 

on the side of the unit with the provided screws and fasten it to a stand / board / truss / furniture.

Fixing the Bracket to the Device

Fasten the mounting bracket on the side of the unit with the provided screws (4 pcs M3 screws per Mounting 

bracket V2).

WARNING! 

M3x6 size is the longest allowed screw for fixing the ears to the housing. Using different 

(e.g. longer) ones may cause damage to the device.

Furniture Mounting

WARNING! 

Pay attention to the ventilation holes when designing the system. Front and rear ventilation 

holes must not be covered.

INFO: 

The chipboard screws are not supplied with the mounting kit.

5.1.2. Rack Shelf Mounting

Allows rack mounting for half-rack, quarter-rack and pocket sized units.

1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units. 

Pocket sized devices can also be fastened on the self.

WARNING! 

Pay attention to the ventilation holes when designing the system. Front and rear ventilation 

holes must not be covered.

INFO: 

The screws for the rack frame are not supplied to the device.

 

 

Содержание UBEX-MMU-X200






























































































































































































































































Отзывы:

Нет отзывов