manualshive.com logo in svg

Lightware RAP-B511-EU, Руководство пользователя

Изысканное крепление Lightware RAP-B511-EU обеспечивает надежную фиксацию вашего устройства в автомобиле. Для правильной настройки и установки, обратитесь к руководству пользователя. Скачайте бесплатное руководство по использованию на manualshive.com. Удобство и безопасность вождения - в ваших руках!

Поделиться
Скачать
background image

 

10. Appendix 

 RAP-B511 series

 

– User's Manual 

115

Applied firmware package: v1.1.0b3b3 | LDC software: v2.5.1b5

10.1. Specifications

General

Compliance

 .........................................................................................

CE

Electrical safety ...........................................................

EN 62368-1:2014

EMC (emission)

.......................................................

IEC/EN 55032:2015

EMC (immunity)

 ......................................................

IEC/EN 55035:2017

RoHS ...............................................................................

EN 63000:2018

Warranty

 .......................................................................................3 years

Operating temperature ............................

0° to +50°C (+32° to +122°F)

Operating temperature ...............................

0 to +50˚C (+32 to +122˚F)

Operating humidity ..................................10% to 90%, non-condensing

Cooling

.........................................................................................Passive

Power

Power supply option......................... ....................

Power adaptor / PoE

Power consumption (supplied by local power) ..........................

1.78W

Power consumption (supplied by PoE) .......................................

1.87W

Heat dissipation (max) ..............................................................

7 BTU/h

Power over Ethernet (PoE) .................. via Ethernet port (IEEE802.3af)

Power adaptor (not supplied)

Supported power source ................................

100-240 V AC; 50/60 Hz

Supplied power ..................................................................

48V DC, 0.5A

AC power plug

 ......................

Interchangable (EU, UK, JP/US, AUS/NZ)

DC power plug

 ............................................... 2-pole Phoenix connector

Enclosure

Rack mountable .................................................................................. No
Enclosure material ................................................................ 1 mm steel
Dimensions in mm (-EU) ...................................

152 W x 58.1 D* x 82 H

Dimensions in inch (-EU) ........................................

6 W x 2.3 D* x 3.3 H

Dimensions in mm (-UK)

 ..................................

140 W x 58.1 D* x 80 H

Dimensions in mm (-UK)

 .....................................

5.6 W x 2.3 D* x 3.2 H

Dimensions in mm (-US)...........................

115.9 W x 58.1 D* x 115.9 H

Dimensions in mm (-US)......................................

4.6 W x 2.3 D* x 4.6 H

Weight (-EU)

 ....................................................................................

412g 

Weight (-UK)

 .................................................................................... 380g

Weight (-US)

 ....................................................................................

433g

* with the front panel and rotary knob

Control Ethernet

Connector type

 ..................................................

RJ45 female connector

Ethernet data rate ..............

10/100Base-T, full duplex with autodetect

Power over Ethernet (PoE) ............................. PoE in (1x), PoE out (1x)

RS-232

Connector type

 .............................................. 3-pole Phoenix connector

Baud rates ..........................................

between 4800 and 115200 baud

Data bits ......................................................................................... 8 or 9
Parity ..........................................................................

None / Odd / Even

Stop bits ...................................................................................

1 / 1.5 / 2

Output voltage: Low / High level

 ...............................

3 - 15V / -15V - 3V

Infrared port

Input............................................... ............................Built-in IR detector

GPIO port

Connector type

 ..............................................

4-pole Phoenix connector

Number of configurable pins

 ................................................................3

Port direction................................................................... Input or output

10.2. 

Factory Default Settings

Parameter

Setting/Value

Button settings

Button enabled

true

Operation mode

0

Interaction state

true

EnabLED

true

LED function for True state

off

LED function for False state

off

Button LED lowbright level

2

Button LED highbright level

5

Network settings

IP address

192.168.0.100

Subnet mask

255.255.255.0

Static gateway

192.168.0.1

DHCP

Disabled

LW2 port number

10001

LW3 port number

6107

HTTP port number

80

RS-232 settings

Control protocol

LW2

Baud rate

57600

Databits

8

Parity

No

Stopbits

1

Operation mode

Command Injection

Command injection port nr.

8001

Recognizer delimiter

0D0A

Recognizer Timeout

0 (disabled)

Recognizer Active property timeout

50

IR port settings

Command injection status

Enabled

Command injection input port nr.

9001

GPIO port settings

Output level / Direction

High / Input

 

Содержание RAP-B511-EU

























































































































Отзывы:

Нет отзывов

Похожие инструкции для RAP-B511-EU

IBM 2702 Information Manual preview
2702
Бренд: IBM Страницы: 105
2gig Technologies GC3 Manual preview
GC3
Бренд: 2gig Technologies Страницы: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Бренд: 2gig Technologies Страницы: 2
G1SLE MK2 Alignment Manual preview
MK2
Бренд: G1SLE Страницы: 2
Baby Jogger VUE Assembly Instructions Manual preview
VUE
Бренд: Baby Jogger Страницы: 24
Baby Jogger POD Assembly Instructions Manual preview
POD
Бренд: Baby Jogger Страницы: 16
Baby Jogger city select LUX Assembly Instructions Manual preview
city select LUX
Бренд: Baby Jogger Страницы: 20
Baby Jogger CITY ELITE SINGLE Instructions For Use Manual preview
CITY ELITE SINGLE
Бренд: Baby Jogger Страницы: 24
Baby Jogger CITY MINI 2 Assembly Instructions Manual preview
CITY MINI 2
Бренд: Baby Jogger Страницы: 147
Cabletron Systems SmartSwitch 6000 Installation & User Manual preview
SmartSwitch 6000
Бренд: Cabletron Systems Страницы: 76
Daikin BRC1E61 Operation Manual preview
BRC1E61
Бренд: Daikin Страницы: 56
Danfoss ERC 211 User Manual preview
ERC 211
Бренд: Danfoss Страницы: 36
HANYOUNG NUX TS500 Manual preview
TS500
Бренд: HANYOUNG NUX Страницы: 56
MULTISPAN UTC-4203 Operating Manual preview
UTC-4203
Бренд: MULTISPAN Страницы: 2
Gardena 8200-20 Operator'S Manual preview
8200-20
Бренд: Gardena Страницы: 236
Kampmann 197901960988 Manual preview
197901960988
Бренд: Kampmann Страницы: 5
bihl+Wiedemann BW3489 Installation Instructions Manual preview
BW3489
Бренд: bihl+Wiedemann Страницы: 16
Trane Tracer CH.530 RLC-SVU01B-E4 Owner'S Manual preview
Tracer CH.530 RLC-SVU01B-E4
Бренд: Trane Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды