Lightware RAP-B511-EU-K Скачать руководство пользователя страница 28

Страница: 28 / 73

5. Software Control - Lightware Device Controller

RAP-B511 series

– User's Manual

5.4.1.

Button Properties

Click the button icon on wireframe view to display and modify the related configuration.

ATTENTION!

Clicking on the button icon on the wireframe view does not simulate the button click.

Test

Button Press

button is for that purpose.

The following settings are available in the Button Properties section:

▪

Button enabled

: The buttons can be enabled or disabled independently of each other (when the button

is disabled, pressing it will have no effect).

▪

Button name:

The button name can be 32 character-long, ASCII characters are allowed. Longer names

are not accepted.

▪

Operation mode:

Three modes are available: momentary, toggle, or radio group (1-5). For more details

about the operation modes, see the

Buttons

section.

▪

Interaction state

: Displays the current state of the selected button. For more information about the

interaction states, see the

Buttons

section.

▪

LED enabled:

LED function of the selected button can be turn on and off.

▪

Test Button Press

: Press the

Test Button Press

button to test the buttonpress (indicates a virtual button press).

▪

LED function for TRUE/FALSE state

: Six default button LED state can be set : off / low bright / high bright/

blink /slow blink / sine pulse

LED behavior changes depending on the interaction state. For more information, see the

Button LED

Configuration

section.

5.4.2. Configure Button

This section provides a layout where button functions can be set quick and easy.

The first two configuration tabs are

for setting the Actions (outputs)

of the chosen button. In this case, the

trigger

condition is always the same

. The second two tabs are

for setting the Feedbacks (conditions or inputs)

and

the

action is fix

The tab denomination depends on the button operation mode. A short description gives a hint to choose the

proper condition or action for the selected button.

Tabs to set the action

Tabs to set the feedback

Short description

Action or condition list

Summary of the actions and feedbacks tabs

Button

operation mode

Tab name

Action

Feedback (condition)

Momentary

Press actions

Choose the desired action from

the list

Interaction state is true

Release actions

Choose the desired action from

the list

Interaction state is false

TRUE feedbacks

Interaction state is true

Choose the desired condition

from the list

FALSE feedbacks

Interaction state is false

Choose the desired condition

from the list

Toggle

Toggle ON actions

Choose the desired action from

the list

Interaction state is true

Toggle OFF actions

Choose the desired action from

the list

Interaction state is false

TRUE feedbacks

Interaction state is true

Choose the desired condition

from the list

FALSE feedbacks

Interaction state is false

Choose the desired condition

from the list

Radio group 1-5

Turn ON action

Choose the desired action from

the list

Interaction state is true

Turn OFF action

Choose the desired action from

the list

Interaction state is false

TRUE feedbacks

Interaction state is true

Choose the desired condition

from the list

FALSE feedbacks

Interaction state is false

Choose the desired condition

from the list









Содержание RAP-B511-EU-K










































































Результаты поиска

Содержание RAP-B511-EU-K

Отзывы:

Похожие инструкции для RAP-B511-EU-K

Бренды по названию

Популярные бренды

Lightware RAP-B511-EU-K, Руководство пользователя

Результаты поиска

Содержание RAP-B511-EU-K

Отзывы:

Похожие инструкции для RAP-B511-EU-K

Бренды по названию

Популярные бренды