Lightware MX2M-FR24R, Руководство пользователя

Страница: 54 / 126

7. Software Control - Lightware Device Controller Hybrid Modular Matrix Switcher series – User's Manual 54
Applied firmware package: v1.0.0 | LDC software: v2.4.0b3
7.7. Presets
Select the Crosspoint / Presets menu to open the preset operations of the matrix. #preset
The router can store presets and the followings are stored in each slot: input/output crosspoint state, muted/
unmuted states. Preset loading has an effect on all ports, except the locked ones.
ATTENTION! When factory default settings are restored presets are deleted.
ATTENTION! The Preset loading has an effect on all ports, except the locked ones.
Preset menu
Loading a Preset
Step 1.
Select the
Presets
tab from the
Crosspoint
menu.
Step 2.
Select the desired preset; check the
Preview
panel and press the
Load
button. Press
Yes
in the
confirmation window.
Auto load mode
When the
Auto load
button is highlighted with green, the mode is active. In this case,
confirmation is
not
required: the selected preset is loaded immediately when the
button is pressed.
Saving a Preset to an Empty Slot
Step 1.
Arrange the desired crosspoint connections in
Tile view
or
Grid view
.
Step 2.
Select the
Presets
tab from the
Crosspoint
menu and type the desired
Preset name
in the indicated text
field up to 16 characters. The followings are allowed when naming: letters (A-Z and a-z), hyphen (-),
underscore (_), and numbers (0-9).
Step 3.
Press the
Create New Preset
button to store the configuration.
Overwriting an Existing Preset
Step 1.
Arrange the desired crosspoint connections.
Step 2.
Select an existing preset, press the
Save
button and
Yes
to confirm.
Renaming a Preset
Step 1.
Select the desired preset you want to rename.
Step 2.
Type the desired name and press the
Rename Preset
button.
Deleting a Preset
Step 1.
Select the desired preset you want to delete.
Step 2.
Press the
Delete
button and
Yes
to confirm.
Auto Load
   