4. Front Panel Control
MX2-HDMI20 series – User's Manual
22
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
3.2.
Front Panel LCD Menu Operations
The company logo is displayed on the screen during the boot-up. The main menu is
displayed after about 30 seconds later and the device is ready to use.
Menu Structure
The front panel has a color LCD that shows the most important settings and parameters
structured in a menu. The jog dial control knob can be used to navigate between the menu items or change
the value of a parameter. The knob can be pressed to enter a menu or edit/set a parameter.
Parameter Selection
The
blue
colored line means the selected menu/parameter, the
green
one means the current setting.
TIPS AND TRICKS: The faster you rotate the jog dial, the faster the
parameter list is scrolled.
Enter the menu/ submenu
Icon before the line indicates the additional submenus. Click with the
rotary to enter.
Icon shows, that there is no submenu or setting possibility.
3.2.1.
System Settings Menu
Network Submenu
The parameters of the network connection can be set in this submenu.
The first three lines (IP, Subnet, and Gateway parameters) show the
current settings. If the DHCP option is disabled, three more parameters
are listed which can be set for a static IP address:
▪
Static IP,
▪
Static Subnet,
▪
Static Gateway.
ATTENTION!
If you change the network settings, always press the
Save option under Network menu (not only in the submenu of the
parameter) to apply the new settings.
#network #ipaddress
#dhcp
Network security feature can be enabled or disabled in this submenu.
·