Lightware MX16x16DVI-Pro, Руководство пользователя

Страница: 23 / 79

MX32x32DVI-Pro
User’s Manual
Page 23 / 79
3.1 Switching and control commands
3.1.1 Switch one input to one output
Description: Switch input ii to output oo.
Example: Connect input 1 to output 5.
3.1.2 Switch one input to all outputs
Description: Switch input ii to all outputs.
Example: Switch input 1 to all outputs.
3.1.3 View connection on the specified output
Description: View connection on output oo.
Example: View connection on output 5.
3.1.4 View connection on all outputs
Command
{VC}

Response
(ALL●O1●O2●O3●O4●O5●O6●O7●O8●
O9●O10●O11●O12●O13●O14●O15●O16
●
O17●O18●O19●O20●O21●O22●O23●O24●
O25●O26●O27●O28●O29●O30●O31●O32●
)CrLf
Description:
Response length depends on the router’s type (length = 16 for
MX16x16 frame, length = 32 for MX32x32) and is independent from the number of
installed outputs. The response above supposes a router having 32 outputs. The
16x16 frame responds only 16 outputs. Indexes show the actual output and the
number at the given index shows which input it is connected to. If value O5 equals
04 it means that output 5 is connected to input 4.
O1..O32 are two digit ascii characters. (01, 02, 04, etc.)

MX32x32 frames always respond 32 outputs while MX16x16 frames always respond 16 outputs.
Command {ii@oo}
Response (O
oo●Iii)CrLf
→
{1@5}
←
(O05 I01)CrLf
Command {ii@O}
Response (I
ii●All)CrLf
→
{01@O}
←
(I01 All)CrLf
Command {?oo}
Response (
Ooo●Iii)CrLf
→
{?05}
←
(O05 I01)CrLf