Lightware MX16x16DVI-Pro, Руководство пользователя

Страница: 30 / 79

Page 30 / 79
3.3 EDID router commands
3.3.1 Route EDID to the selected input (static)
Description: Copies EDID from
location LLL to input ii. LLL
should be 1..100
Example:
3.3.2 Route EDID to the selected input (dynamic)
Description: Copies EDID from
location LLL to input ii. Location
LLL should be 101..132 as
opposed to static routing where LLL should be between 1..100.
Info: Inputs 1..32 are mapped to logical addresses 101..132
After choosing dynamic EDID routing to one (or all inputs) the router will follow the
EDID changes occured on the output it was connected to.
Example:
After issuing this command the router will automatically
copy the new EDID on output1 (remember logical address = 101) if it changes.
3.3.3 Route one EDID to all inputs
Description: Copies EDID from
the selected location LLL to all
inputs.
Example:
3.3.4 Save EDID from output to memory location (Learn EDID)
Description: Learn EDID from
the specified output oo to the
specified location LLL
Example:
Command {ii:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
→
{5:10}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
Command {ii:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
→
{4:101}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
Command {A:LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
→
{A:48}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf
Command {oo>LLL}
Response (E_SW_OK)CrLf (E_S_C) CrLf
→
{24>101}
←
(E_SW_OK)CrLf
←
(E_S_C) CrLf