manualshive.com logo in svg

Lightware MX-FR17, Руководство пользователя

Пользовательский мануал для продукта Lightware MX-FR17 доступен для бесплатного скачивания на нашем сайте. Получите подробное руководство по эксплуатации для вашего устройства и ознакомьтесь с его функциями и возможностями. Скачайте мануал с manualshive.com.

Поделиться
Скачать
background image

11. Appendix 

MX-FR Series Modular Matrix Frames – User's Manual 

171

Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2

DVI Output (with digital signal support)

Connector type ................................................................................................................................29-pole DVI-I
AV standard .............................................................................................................................DVI 1.0, HDMI 1.4
HDCP compliance ................................................................................................................................ HDCP 1.4
Color space .......................................................................................................................................

RGB, YCbCr

Video delay .............................................................................................................................................. 0 frame

Supported resolutions at 8 bits/color *

 ......... up to 4096x2048@30Hz (4:4:4) or 4096x2048@60Hz (4:2:0)

 ......................................................................... up to 3840x2160@30Hz (4:4:4) or 3840x2160@60Hz (4:2:0)
 ...................................................................................................

1920x1080@60Hz (4:4:4) up to 12 bits/color

Reclocking ................................................................................................................ Pixel Accurate Reclocking
3D support ......................................................................................................................................................

Yes

Audio formats .............................................................................................................................8 channel PCM
 ...........................................................................................................Dolby TrueHD, DTS-HD Master Audio 7.1
Output preemphasis ...................................................................................................................

Yes, +6dB fixed

* All standard VESA, CEA and other custom resolutions up to 300MHz (HDMI1.4) are supported.

DVI-DL Output (with digital signal support)

Connector type ................................................................................................................................29-pole DVI-I
AV standard .............................................................................................................................................. DVI 1.0
Color space ................................................................................................................................................... RGB
Video delay .............................................................................................................................................. 0 frame

Supported resolutions at 8 bits/color

 ............................................................up to 2560x1600@60Hz (4:4:4)

 ..................................................................................................................................1920x1200@120Hz, 24 bit
3D support ......................................................................................................................................................

Yes

Audio formats .............................................................................................................................8 channel PCM

TPS Output

Connector type ...........................................................................................................................

RJ45 connector

Power over Ethernet (PoE) .................................................................................................yes * (IEEE 802.3af)
Compliance ....................................................................................................................................... HDBaseT

TM

HDCP compliance ................................................................................................................................ HDCP 1.4
Transferred signals .............................................................................Video, Audio, RS-232, Infrared, Ethernet

* PoE function is available for the MX-TPS-OB

-P

 series input boards only.

Color space .......................................................................................................................................

RGB, YCbCr

Video delay .............................................................................................................................................. 0 frame

Supported resolutions at 8 bits/color **

 ....... up to 4096x2048@30Hz (4:4:4) or 4096x2048@60Hz (4:2:0)

 ......................................................................... up to 3840x2160@30Hz (4:4:4) or 3840x2160@60Hz (4:2:0)
 ...................................................................................................

1920x1080@60Hz (4:4:4) up to 12 bits/color

Audio formats .............................................................................................................................8 channel PCM
 ...........................................................................................................Dolby TrueHD, DTS-HD Master Audio 7.1

** All standard VESA, CEA and other custom resolutions up to 300MHz (HDMI1.4) are supported.

11.1.7. 

Fiber Optical Ports

ST Connector

Connector type .............................................................................................................................. ST receptacle
Fiber type .................................................................................................................

50/125 ST Multimode fiber

Laser wavelengths .............................................................................................................. 850, 1310, 1550 nm

Laser class specification

 ...................................................................................................................... Class 3R

Transmitter output OMA * ............................................................................................ -6.25 dBm (worst case)
Receiver OMA * sensitivity .........................................................................................-14.25 dBm (worst case)
Optical loss budget ............................................................................................................. 8 dBm (worst case)

SC Connector

Connector type .............................................................................................................................. SC receptacle
Fiber type .................................................................................................................

50/125 ST Multimode fiber

Laser wavelengths .............................................................................................................. 850, 1310, 1550 nm

Laser class specification

 ...................................................................................................................... Class 3R

Transmitter output OMA * ............................................................................................ -6.25 dBm (worst case)
Receiver OMA * sensitivity .........................................................................................-14.25 dBm (worst case)
Optical loss budget ............................................................................................................. 8 dBm (worst case)

* OMA: Optical Modulation Amplitude

 

Содержание MX-FR17































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX-FR17

UniKey SR3 Installation Manual & User Manual preview
SR3
Бренд: UniKey Страницы: 20
Kasco C10 Installation & Operation Manual preview
C10
Бренд: Kasco Страницы: 3
C Prox Ltd FP1 User Manual preview
FP1
Бренд: C Prox Ltd Страницы: 5
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
Jabra LINK 280 - User Manual preview
LINK 280 -
Бренд: Jabra Страницы: 8
NCR MSR Instructions Manual preview
MSR
Бренд: NCR Страницы: 8
National Instruments sbRIO-9629 Quick Reference Manual preview
sbRIO-9629
Бренд: National Instruments Страницы: 2
PACH & COMPANY AeGIS 4000 Quick Installation And Programming Manual preview
AeGIS 4000
Бренд: PACH & COMPANY Страницы: 4
Polycom VVX Series Basic Troubleshooting preview
VVX Series
Бренд: Polycom Страницы: 2
Baninni BN-1266 MILANO Instruction Manual preview
BN-1266 MILANO
Бренд: Baninni Страницы: 5
Zapf Creation Baby Born 828656 Manual preview
Baby Born 828656
Бренд: Zapf Creation Страницы: 2
Mazurczak MTR 3000 Installation And Operating Instructions Manual preview
MTR 3000
Бренд: Mazurczak Страницы: 9
Cypress CY3280-BK1 Quick Start Manual preview
CY3280-BK1
Бренд: Cypress Страницы: 3
INSBUD IB-TRON 4000 SOL Instruction Manual preview
IB-TRON 4000 SOL
Бренд: INSBUD Страницы: 14
babyplus CompactTWIN Assembly & Operating Instructions preview
CompactTWIN
Бренд: babyplus Страницы: 28
Sartorius PR 5610 Installation Manual preview
PR 5610
Бренд: Sartorius Страницы: 165

Бренды по названию

Популярные бренды

Загрузить еще бренды