Lightware MX-FR17, Руководство пользователя

Страница: 106 / 190

7. Programmer’s Reference MX-FR Series Modular Matrix Frames – User's Manual 106
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
7.4.22. Querying the Name of an Input
Command and Response
ȩ
{INAME# <in> =?}
Ȩ
(INAME# <in> = <Input_name> )CrLf
Example
ȩ
{iname#1=?}
Ȩ
(INAME#1=PC_1)CrLf
Name for Input 1 is 'PC_1'.
7.4.23. Querying the Name of an Output
Command and Response
ȩ
{ONAME# <out> =?}
Ȩ
(ONAME# <out> = <output_name> )CrLf
Example
ȩ
{oname#2=?}
Ȩ
(ONAME#2=Monitor_2)CrLf
Name for Output 1 is 'Monitor_2'.
7.4.24. Reloading the Default Preset Names
ATTENTION! The <id> field is not relevant here, it only needs to be a valid one. The command will affect
ALL presets, disregarding the actual number that was in the command.
Command and Response
ȩ
{PNAME# <id> =!}
Ȩ
(PNAME# <id> =Preset• <id> )CrLf
Example
ȩ
{pname#2=!}
Ȩ
(PNAME#2=Preset 2)CrLf
All preset names are set to default: 'Preset 1', 'Preset 2', and so on.
7.4.25. Reloading the Default Input Names
ATTENTION! The <id> field is not relevant here, it only needs to be a valid one. The command will affect
ALL inputs, disregarding the actual number that was in the command.
Command and Response
ȩ
{INAME# <id> =!}
Ȩ
(INAME# <id> =Input• <id> )CrLf
Example
ȩ
{iname#4=!}
Ȩ
(INAME#4=Input 4)CrLf
All input names are set to default: 'Input 1', 'Input 2', and so on.
7.4.26. Reloading the Default Output Names
ATTENTION! The <id> field is not relevant here, it only needs to be a valid one. The command will affect
ALL outputs, disregarding the actual number that was in the command.
Command and Response
ȩ
{ONAME# <id> =!}
Ȩ
(ONAME# <id> =Output• <id> )CrLf
Example
ȩ
{oname#3=!}
Ȩ
(ONAME#3=Output 3)CrLf
All output names are set to default: 'Output 1', 'Output 2', and so on.
   