Page 38 / 113
Section 6. Web control
– Using the built-in website
6.3. Crosspoint menu
Crosspoint panel
Displaying connections between the input and output ports:
Dark tiles:
Connection is not possible.
Grey tiles:
Connection is possible but not established.
White tiles:
Connection is established.
Input module properties
Each color bar represents a module. Properties window
appears displaying information and settings about the given
input module by clicking on the colored bar.
Input ports
Displaying available input ports of the selected layer.
Layers
Showing the available layers as submenus; they depend on
the installed interface modules.
Navigation buttons
If the window is smaller than required, input and/or output
ports may not fit in the available area. Thus the arrows on this
button get activated and the ports can be scrolled. Clicking in
the middle icon restores the original layout (crosspoint is
arranged to the left top corner).
Properties button
Toggling right panel display, showing the properties of
selected port. The panel is also displayed when left-clicking
on a port.
Tutorial button
Displaying MODEX tutorial in the appearing window
containing the most important descriptions shortly.
Output ports
Displaying available output ports of selected layer.
Output module properties
Each color bar represents a module. Properties window
appears displaying information and settings about the given
output module by clicking on the colored bar.
8
5
3
2
1
9
4
6
7
1
2
3
4
5
6
7
8
9
