Lightware MODEX-OPTM-RX, Руководство пользователя

Страница: 33 / 113

MODEX-OPTS, MODEX-OPTM
User’s Manual
Section 5. Front panel operations Page 33 / 113
5.4.4. MODEX-IF-AUD
Settings

Application mode: Basic working mode can be set; for details about application
modes see section
6.4.3 on page 43 .
- (0) Analog

Emb. & Ret. Aux (default): Analog audio to Main audio
Group, S/PDIF to S/PDIF Audio Group (see section 6.4.3.1 on page 43 ).
- (1) Analog

Forw. & Ret., S/: Analog audio to S/PDIF Audio Group,
S/PDIF disabled (see section 6.4.3.2 on page 44 ).
- (2) S/PDIF

Emb., Analog not: S/PDIF audio in to Main Audio Group,
Analog audio disabled (see section 6.4.3.3 on page 44 ).
Changes are stored automatically without pressing the enter

button.

Analog in: Certain parameters of the input signal can be adjusted as follows:
- Gain: from 0 dB to +24 dB, step 3 dB (default is 0 dB)
- Volume: from 0 dB to -63 dB, step 0.5 dB (default is 0 dB)
- Balance: from 0 to 100%, step 1% (default is 50%=center)
Use the up
▲ and down ▼ buttons to change values. Changes are stored
automatically without pressing the enter

button.

Analog out: Certain parameters of the output signal can be adjusted as follows:
- Volume: from 0 dB to -52 dB (step 0.5 dB), from -54 dB to -66 dB (step
2 dB); -69 dB; -72 dB; -78 dB (default is 0 dB)
- Balance: from 0 to 100%, step 1% (default is 50%=center)
Use the up
▲ and down ▼ buttons to change values. Changes are stored
automatically without pressing the enter

button.
5.4.5. MODEX-IF-RS232-IR
Settings

RS232:
- Baud rate: 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 / 128000 /
153600 / 230400 / 256000
- Data bits: 5 / 6 / 7 / 8 / 9
- Stop bits: 1 / 1.5 / 2
- Parity: None / Odd / Even / Mark / Space

IR Input
- Carrier frequency: from 30.000 to 200.000 Hz, step 500 Hz (default is
38.000 Hz)

IR Output
- Carrier frequency: from 30.000 to 200.000 Hz, step 500 Hz (default is
38.000 Hz)
Use navigation buttons to change values and press the enter

button to store the
new settings.