6. Software Control - Using Lightware Device Controller
MODEX-F15-OPTS, MODEX-F15-OPTM series – User's Manual
33
6.4.
Video Layer
After selecting the Video tab the video crosspoint status is displayed.
Video Crosspoint Tab
6.4.1.
Input Port Properties - Transmitter
Click on the desired input port to open the port
properties window.
Available settings:
▪
Change the name of the port;
▪
HDCP setting (enable / disable);
▪
Mute/unmute the port;
▪
Lock/unlock the port;
▪
Frame detector (see details in
▪
Factory default settings for the selected port.
6.4.2.
Output Port Properties - Transmitter
Click on the optical output port to open the port properties
window. The most important information and settings are
available from the panel.
Available settings / information:
▪
Change the name of the port;
▪
Mute/unmute the port;
▪
Lock/unlock the port;
▪
Autoselect settings
: enable / disable, mode, and
priorities. (See more details in
▪
Frame detector (see details in
▪
Port info: status information about the optical
connector (the port type depends on the installed
media module). The link uptime, link quality, and the
link errors can be checked on the panel. The values
can be cleared by clicking on the
Reset
button.
▪
Factory default settings for the selected port.
6.4.3.
Input Port Properties - Receiver
Click on the optical output port to open the port properties
window. The most important information and settings are
available from the panel.
Available settings / information:
▪
Change the name of the port;
▪
Mute/unmute the port;
▪
Frame detector (see details in
▪
Port info: status information about the optical
connector (the port type depends on the installed
media module). The link uptime, link quality, and the
link errors can be checked on the panel. The values
can be cleared by clicking on the
Reset
button.
▪
Factory default settings for the selected port.
