Lightware MMX6x2-HT200 Скачать руководство пользователя страница 76

Страница: 76 / 91

8. Firmware Upgrade

MMX6x2-HT series – User's Manual

Step 2.

Select the device.

LDU - Device selection window

The next step is to select the desired device(s). The available and supported devices are searched for and

listed automatically. If the desired device is not listed, update the list by clicking the

Refresh

button. Select

the desired device by highlighted them: highlight them with a

yellow cursor,

then click

A tick mark can be seen in the

Added

column if the device was added by the user previously.

Firmware Components

The components of the installed and update firmware version for the selected devices are listed on the

following screen. (Update version will be uploaded to the device.)
Add a device by clicking on the

Add device

button. The previous screen will be shown; select the desired

device(s) and click

LDU - Firmware package components

Remove a device by selecting it (highlight with yellow) and clicking on the

Remove device

button, or by clicking

Remove all

button to clear the list.

Enabling

Factory reset

will perform factory default values for all settings in the device. Three different status

can exist:

▪

Enabled by user

: all settings will set to factory default values.

▪

Disabled by user

: your settings will be saved and restored after upgrading.

▪

Enabled by default and not changeable by user

: firmware upgrade must perform a factory reset to apply all

changes coming with the new firmware version.

Click on the

Next

button to continue.



 



Содержание MMX6x2-HT200




























































































Результаты поиска

Содержание MMX6x2-HT200

Отзывы:

Похожие инструкции для MMX6x2-HT200

Бренды по названию

Популярные бренды

Lightware MMX6x2-HT200, Руководство пользователя

Результаты поиска

Содержание MMX6x2-HT200

Отзывы:

Похожие инструкции для MMX6x2-HT200

Бренды по названию

Популярные бренды