Lightware MMX4x2 Series, Руководство пользователя

Страница: 41 / 172

5. Software Control - Lightware Device Controller MMX4x2 series – User's Manual 41
Applied firmware package: v1.6.0b19 | LDC software: v2.5.13b5
5.4. Crosspoint Menu
DIFFERENCE: The appearance of the Crosspoint menu and the Audio port parameters show less features
and settings in case of firmware package v1.0.0. #crosspoint #switch
1
Main menu The available menu items are displayed. The active one is showed with
dark grey background color.
2
Information ribbon The label shows the device label, which can be edited in the
Settings menu - Status tab. Device discovery window can be displayed by
clicking on this ribbon. Hover the mouse cursor over the information ribbon;
the
product name
and the
IP address
of the device will appear as a tooltip text.
3 Submenu selector The audio and video crosspoint menu and the preset settings are available
under the two tabs.
2
3
4
5
6
7
8
1
4
Video input ports Each tile represents a video input port ( TPS Video Input / HDMI Video
Input ). The tile below the port shows the current crosspoint setting; if the
port is switched to the output, the color of the tile is white, otherwise grey.
5 Audio input ports Each tile represents an audio input port. The A1 and A2 are logical audio
ports, they mean the audio channel of the selected TPS/HDMI inputs. The
A3 is the Analog Audio Input .
6
Advanced view Displays the Advanced View Window , showing the Terminal window and
the LW3 protocol tree.
7
Audio output ports HDMI and analog audio output ports; clicking on the O1/O2 tiles opens
the Digital Audio Output window; clicking on the O3 tiles opens the Analog
Audio Output window.
8 Video output ports HDMI video output ports; clicking on the tile opens the HDMI Video Output
port properties window.
Steps of Crosspoint Selection:
Step 1.
Select the source from the video inputs (I1...I4) in the VIDEO section. It will specify the digital audio
input selection as well.
Step 2.
Select the audio source from the audio inputs (A1...A3). A1 and A2 digital audio inputs come from
the previously selected HDMI video outputs. A3 is the analog audio input, which can be embedded
into the HDMI output.
TIPS AND TRICKS: Pre-programmed audio crosspoint settings can be selected by the
Set Audio Config
button, see the details in the Set Audio Config Button section.
The Port Diagram of MMX4x2-HT200
   