Lightware HDMI20-OPTC series страница 16 Скачать руководство пользователя

Страница: 16 / 75

3. Product Overview

HDMI20-OPTC series – User's Manual

Neutrik OpticalCON QUAD Connector

HDMI20-OPTC-220-NTQ extenders supplied with Neutrik opticalCON QUAD connector

(NO4FDW-A type) with four fiber channel. The sealing cover helps to protect against the

dust and dirt.

QUAD

LC Connector

One channel of the Neutrik connector is not used by the extenders for signal

transmission and it is internally connected to the LC break-out connector in all models.

For more information about break-out connector see

Application Example with Break-

out Connector

section.

WARNING! Avoid eye exposure to beam! Direct intrabeam viewing normally hazardous.

INFO: Fiber optic cables can be easily damaged if they are improperly handled or installed. Handle the

optical cables with care to avoid damage.

3.4.3. HDMI Input and Output Ports

The extender provides standard 19-pole HDMI connector with screw lock.

ATTENTION!

Always use high-quality HDMI cable for connecting sources and displays.

3.4.4. Ethernet (LAN) Port

HDMI20-OPTC series extenders are supplied Neutrik etherCON connector (NE8FBH-S

type) for Ethernet/ LAN connection. The Ethernet port can be connected to a LAN hub,

switch or router by a CATx cable. However, both cable types (straight or cross) are

supported and handled by the device, below pin assignment is recommended.

Pin TIA/EIA T568 A

Color and name

TIA/EIA T568 B

Color and name

white/green stripe

white/orange stripe

green solid

orange solid

white/orange stripe

white/green stripe

blue solid

white/blue stripe

orange solid

green solid

white/brown stripe

brown solid

3.4. Electrical Connections

3.4.1. Power Connectors

HDMI20-OPTC series has AC connectors, accepts 100-240 V, 50 or 60 Hz. Two different power connector

type is available:

Standard IEC C14 Connector

The HDMI20-OPTC-220-PRO, HDMI20-OPTC-220-FOX, HDMI20-OPTC-220-NTQ series

extenders are supplied with IEC C14 power connector.

Neutrik PowerCON TRUE 1 Connector

The HDMI20-OPTC-220-PCN extenders are supplied with NT PowerCON TRUE 1

Connector (NAC3MPX type).

3.4.2. Optical Connectors

HDMI20-OPTC series extenders transmit the video, embedded audio, Ethernet, and serial signal using

multimode 50/125 fiber optical cable.

Neutrik OpticalCON Duo Connector

HDMI20-OPTC-220-PRO and HDMI20-OPTC-220-PCN extenders supplied with Neutrik

opticalCON connector (NO2-4FDW type LC duplex) and LC ODVA connector have two

fiber channels, channel A and channel B. Only one channel is used (from channel A on

the transmitter to channel B on the receiver). The copper pins of the Neutrik connector

are not in use. Neutrik opticalCON DUO is compatible with 2x LC connector.

Fiberfox Connector

HDMI20-OPTC-220-FOX extenders supplied with MINI expanded beam fiber optic

Fiberfox connector (EBC-1502 type). It has two fiber channels: channel A and channel B.

Only one channel is used (from channel A on the transmitter to channel B on the receiver).

The copper pins of the connector are not in use.

IBE

FOX

C 1

500 Series









Содержание HDMI20-OPTC series












































































Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC series, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC series

Отзывы:

Похожие инструкции для HDMI20-OPTC series

Бренды по названию

Популярные бренды