Lightware HDMI20-OPTC-RX220-Pro страница 25 Скачать руководство пользователя

Страница: 25 / 71

5. Software Control – Using Lightware Device Controller

HDMI20-OPTC series – User's Manual

5.4.

Port Properties Window

5.4.1.

HDMI Input Port -Transmitter

By clicking on one of the HDMI input tile, the most important video

related information and settings are available in the port properties

window.

Available Settings:

▪

Port name

▪

Reloading factory defaults (see more details in

Factory Default

Settings

section).

INFO: Factory default settings have not effect on the emulated EDID.

5.4.2.

HDMI Output Port - Transmitter

Click on the local HDMI output port to open the port properties window.

The most important information and settings are available from the

panel.

Available settings:

▪

Change the name of the port;

▪

Mute/unmute the port;

▪

Autoselect settings: enable / disable, mode, and priorities. (See
more details in

Autoselect Feature

section)

▪

Auto/DVI/HDMI signal type;

▪

Enabling the +5V: Auto / Always on / Always off

▪

Factory default settings for the selected port.

5.4.3.

Optical Output Port - Transmitter

Available settings (related to the transmitter):

▪

Change the name of the port;

▪

Mute/unmute the port;

▪

Autoselect settings: enable / disable, mode, and priorities. (See
more details in

Autoselect Feature

section)

▪

Auto/DVI/HDMI signal type;

▪

Factory default settings for the selected port.

Available settings (related to the receiver):

▪

Output 1 conversion mode: No conversion / Convert to YCbCr
4:2:0 / Split A: left, B: right / Split A: right, B: left. For more
information see

Output Conversion Modes

section.

▪

Output 1/A +5V enable: Auto / Always on / Always off

▪

Output 1/B +5V enable: Auto / Always on / Always off

▪

Output 2 +5V enable: Auto / Always on / Always off



 



Содержание HDMI20-OPTC-RX220-Pro








































































Результаты поиска

Содержание HDMI20-OPTC-RX220-Pro

Отзывы:

Похожие инструкции для HDMI20-OPTC-RX220-Pro

Бренды по названию

Популярные бренды

Lightware HDMI20-OPTC-RX220-Pro, Руководство пользователя

Результаты поиска

Содержание HDMI20-OPTC-RX220-Pro

Отзывы:

Похожие инструкции для HDMI20-OPTC-RX220-Pro

Бренды по названию

Популярные бренды