manualshive.com logo in svg

Lightware HDMI-3D-OPT-TX210A, Руководство пользователя, Страница: 91 / 106

Поделиться
Скачать
Lightware HDMI-3D-OPT-TX210A Скачать руководство пользователя страница 91

Installation in case of Mac OS X

INFO 

 

After the installation, the Windows and the Mac application has the same look and 

functionality. This type of the installer is equal with the Normal install in case of Windows 

and results an updateable version with the same attributes.

Mount the DMG file with double clicking on it and drag the 

LDU icon over the Applications 

icon to copy the program into the Applications folder. If you want to copy the LDU into 

another location just drag the icon over the desired folder.

LDU upgrade

Step 1. 

Run the application. In the welcome screen click on the   button in the top right 
corner; the About window will appear. Click on the 

Check now

 button. The program 

checks the available updates on Lightware website and shows its version.

Step 2. 

Set the desired update settings in the 

Options

 section.

 

▪

If you do not want to check for the 
updates automatically, uncheck the 

circle

, which contains the green tick.

 

▪

If you want to postpone the update, 
a reminder can be set with different 
delays from the 

drop down list

.

 

▪

If the proxy settings traverse the 
update process, set the proper 
values then click the 

OK

 button.

Step 3. 

Press the 

Update

 button to download 

the new version; the installer will 
start.

9.4.  Detailed instructions

9.4.1.  Establish the connection between the computer and the device

Make sure that the computer and the device are connected via a mini USB cable and the 

connection is established between them.

?

HDMI-3D-OPT-TX200 series

User’s manual

Firmware upgrade 

Page 91 / 106

Содержание HDMI-3D-OPT-TX210A











































































































Отзывы:

Нет отзывов