Lightware HDMI-3D-OPT-TX210A Скачать руководство пользователя страница 30

Страница: 30 / 106

6. Software control - Using Lightware Device Controller

The device can be controlled by a computer through the USB, RS-232 and Ethernet port (in

case of SW4-OPT-TX240RAK model only) using Lightware Device Controller (LDC). The

software can be installed on a Windows PC or Mac OS X. The application and the User’s

manual can be downloaded from

www.lightware.eu

. The Windows and the Mac versions

have the same look and functionality.

6.1. Install and upgrade

Installation in case of Windows OS

Run the installer. If the User Account Control drops a pop-up message click Yes.
During the installation you will be prompted to select the type of the installation:

normal

and

the

snapshot

install:

Normal install

Snapshot install

Available for Windows and Mac OS X

Available for Windows

The installer can update only this instance

Cannot be updated

Only one updateable instance can exist for

all users

More than one different version can be

installed for all users

Comparison of installation types

ATTENTION!

Using the Normal install as the default value is highly recommended.

Installation in case of Mac OS X

INFO

After the installation, the Windows and the Mac application has the same look and

functionality. This type of the installer is equal with the Normal install in case of Windows

and results an updateable version with the same attributes.

Mount the DMG file with double clicking on it and drag the LDC icon over the Applications

icon to copy the program into the Applications folder. If you want to copy the LDC into

another location just drag the icon over the desired folder.

Upgrading of LDC

Step 1.

Run the application.

The

Device Discovery

window appears

automatically and the program checks

the available updates on Lightware’s

website and opens the update window

if the LDC found updates.
The current and the update version

number can be seen at the top of the

window and they are shown in this

window even with the snapshot install.
The

Update

window can be also opened

by clicking the

About

and the

Update

button.

Page 30 / 106

Software control

Содержание HDMI-3D-OPT-TX210A











































































































Результаты поиска

Содержание HDMI-3D-OPT-TX210A

Отзывы:

Lightware HDMI-3D-OPT-TX210A, Руководство пользователя, Страница: 30 / 106

Результаты поиска

Содержание HDMI-3D-OPT-TX210A

Отзывы: