5. Firmware Upgrade
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
26
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
5.4.
Detailed Instructions
5.4.1.
Establish the Connection
Make sure that the computer and the device are connected via USB. If you connect
Transmitter
, it must be in
Configuration
mode.
5.4.2.
Start the LDU and Follow the Instructions
After launching LDU the welcome screen will appear. Pressing the
A
button a list will appear showing the
supported devices. Click on the
Extender
button on the main screen.
Welcome screen
Step 1.
Select the Package.
Click on the Browse button and select the
.lfp
file that will be used for the upgrade.
Package information is displayed:
▪
General
version info, creation date, short description,
▪
Devices
which are compatible with the firmware,
▪
Components
in the package with release notes.
Click on the
Next
button and follow the instructions.
TIPS AND TRICKS:
Files with
.lfp
extension are associated to LDU during installation. If you double click on
the “.lfp” file, the application is launched, the package is loaded automatically and above screen is shown.
