Quick Guide for GPRS PCMCIA modem
Install Mobile Phone Tool
.
Click Setup, Mobile Phone Tool will install automatically.
Select the modem you have installed.
If BVRP can not detect modem correctly, please click on Menu, Configuration,
Change Configuration, Change Modem, then select the correct modem you have installed.
You also can open Exchange dialog box to view how to control GPRS modem.
If you have any question, please contact
GPRS-100S Modem Installation without using BVRP software.
To install the GPRS-100S as a modem, you need the MDM_LSMO1XX.inf file. This file exists on CD’s
sub-directory “ Driver” section.
Double-click the "Modems" icon in the "Control panel"
Start
-
Settings
-
Control
-
Modems
Click
Add
to install the driver
Check
the control box
"Don't detect my modem,I will select
it from a list
" and click the
"Next"
button. Click on
Have Disc
to select an external driver
from CD.
Enter the drive and folder the
MDM_LSMO1XX.inf
file is stored in. You can select
GPRS
Modem
for PCMCIA modem.
With the "Browse" button you can search the file, should you be uncertain as to where you stored it.
Choose the
inf
file. Then
Open. Check
if you have selected
the right driver
. Then
Next
Choose the serial interface e.g.COM1 .your mobile is connected to.
Click on
Next Finish
the installation.
Now the modem has been successfully installed
How to Connect to Internet?
Usually you can use Dialing Netwook to dial
“ *99# ” or “ *99***1#”
to connect to Internet. Please check with your ISP,
this may be different in varies ISP.
How to use Windows generic PCMCIA modem driver?
You also can use Windows generic standard PCMCIA modem as driver.
For Windows XP, plug GPRS PC card in to PCMCIA slot. XP will auto-detect it is a standard PCMCIA modem.
Click “Yes” and “Next”, XP will auto-install PCMCIA driver.
How to use HyperTerminal to control GPRS modem?
Please open HyperTerminal, select correct COM port. choose correct DTE speed to match
speed you use for driver. Type in “ATI3” for modem ID. If it response “MO1XX”, then modem is
connected. You can use GPRS AT command set to control this modem.
If there is any question, you are welcome to contact Peter Chen at
