1
STEP BY STEP INSTRUCTIONS
Before installing your garland, remove packaging.
When setting up the garland, carefully position cables
to avoid a tripping hazard, and when hanging use a
stable method of support.
WHAT WE PROVIDE
•
100 LEDs on wire with
beaded strands
•
4x AA battery box
•
1 White Fabric Bag
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care are factors that can’t be built into any product. This approach
must be used by the person(s) caring for and operating the garland.
IMPORTANT
Before assembling your LampLust 100 LED Silver Wire Garland
with silver beads, please make sure that you carefully read
through these instruction sheets.
GENERAL INFORMATION
This garland light is suitable for indoor use only. DO NOT attempt to
replace or repair any damaged cable parts. After use, ensure the
garland is clean and dry before storage.
DO NOT DISPOSE OF IN FIRE. Please dispose at your local recycling facility.
DO NOT submerge any part of the garland in water.
The garland is NOT water resistant.
Installation Instructions
NO.
LC003669
