LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 113 / 133

AireLink

60 Installation and User Manual Rev. D Bluetooth AireLink Viewer
Page 113
8 BLUETOOTH AIRELINK VIEWER
The AireLink 60 system is equipped with a Bluetooth transceiver fully compatible with latest low power
BLUETOOTH SMART specification. When the system ships the Bluetooth connection is enabled by
default and the over the air Bluetooth connection is encrypted and password protected to ensure the
highest level of security. Initially use
default passcode 0000 to access the radio Bluetooth
connection. Please, change the password after the initial installation is completed using the Bluetooth
setting in the web browser
Administration tab (see Chapter 6.10) The user can also enable/disable
access to Bluetooth in the web browser Administration tab (see Chapter 6.10)
LightPointe provides an ANDROID app called LightPointe BLE to access the radio Bluetooth connection.
The app can be downloaded for free from the Goggle Play store https://play.google.com/store . Running
the application requires a Bluetooth capable based smart phone or tablet with Android KitKat (version
4.4) or higher installed. Installing the software will require to grant access to the smart phone/tablet
Bluetooth connection.
After installation of the software is completed, please reboot/restart your
Android phone/tablet to ensure proper operation of the application.
After installing and launching the application, a scan for an AireLink systems will start automatically.
To establish a connection the line-of-sight distance between the phone and the AireLink system should
not be more than 300 feet (100 meters). The distance will be less in case they is an obstruction (roof,
tree, etc.) between the smart phone/tablet and the radio link head. After successful discovery, click
the AireLink system you would like to connect to. When asked, please enter the default passcode 0000
to establish the connection.
The following pages show step-by-step instructions on how to install, launch and interact with the
software.