LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 110 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 110
7.5 CLI -- PING COMMAND
Command:
airelink60>ping { hostname | ip_address }
Description: Ping destination hostname or IP address
? Show available command options
hostname Ping destination hostname
ip_address Ping destination IP address
Example:
airelink60> ping 192.168.1.115
7.6 CLI – Upgrade TFTP Command
Command:
airelink60>upgrade {?|tftp IPserver address |status}
Description: Copy file from one location to another. First field in the command is the “copy from”
option. Second field in the command is the “copy to” option.
? Show available command options
tftp
IP address
Upgrade TFTP server IP address
status Upgrade status
Example:
airelink60> upgrade tftp 192.168.1.1
7.7 CLI – LOG COMMAND
Command:
airelink60>log {?|tftp IPserver address }
Description:
? Show available command options
tftp IP address Get LOG files from specifiedTFTP
server
Example:
airelink60> log tftp 192.168.1.246
Basic Management Port Network Setup
The following commands should be used to set management port network parameters. You should be
in the Configuration Mode to set these settings.