LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 104 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 104
Command:
airelink60(config)# interface management netmask {?|netmask netmask }
Description: Set management interface netmask
? Show available command options
netmask
Set management port IP netmask
Example:
airelink60(config)# interface management netmask 255.255.255.0
Command:
airelink60(config)# interface management gateway {?|gateway ip_address }
Description: Set management interface gateway IP address
?
Show available command options
gateway
Set gateway IP address
Example:
airelink60(config)# interface management gateway 192.1168.1.1
7.3.2 Password Command
Command:
airelink60(config)# password {?|cli/web}
Description: Set cli/web password
? Show available command options
cli/web Set CLI/web password
Example:
airelink60(config)# password cli

enter password at command prompt)
7.3.3 Performance Commands
Command:
airelink60(config)# performance {?|enable|disable|frequency|period|server_ip|tftp|upload}
Description: Set performance data recording parameters.
enable Enable performance data collection
disable Disable performance data collection
frequency Set frequency of performance data collection (minutes)
period
Set period of performance data collection (hours)
server_ip Set TFTP server IP address for uploading performance data
tftp Automatic upload performance data to specified TFTP server
upload Manually upload performance data to specified TFTP server
Examples:
airelink60(config)# performance enable
airelink60(config)# performance frequency 1