4 11/16"
5"
2"
1 1/8"
4
8
2
7
1
6
5
9
3
Lytespan
®
Accent Lighting System
8611E
Page 1 of 1
LyteJacks Surface Power Jack
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • A0206
Features
1. Canopy/Transformer Cover:
Cast Aluminum. .1" nominal wall thickness
2. Mounting bracket:
Steel, attached to J-Box for mounting PowerJack.
3. Plug Jack:
Molded high heat resistant polymer. Accepts all LyteJack fix-
tures
4. Insulated Wires:
To be attached to 120V 60Hz. Supply circuit. Supply wires
must be rated for minimum temperature of 75°C.
5. Plug Jack Support:
Die-cast aluminum. Holds plug jack rigidly to ensure
proper engagement and operation of LyteJack fixtures.
6. Polycarbonate Stem Bushing:
Accurately guides LyteJacks into plug jack.
When using Lytedrops, remove by using a coin such as a dime.
7. Mounting Screws:
(2) Steel screws painted to match fixture color.
Attaches power jack to mounting bracket.
8. 4" Octagonal Outlet Box:
(By others).
9. Insulated Ground Wire:
18Ga wire attached to canopy and connected to
the mounting bracket during insulation.
Electrical
60 Watt Class 2 low voltage (12V) Electronic transformer with auto-reset
thermal cut off. Supply circuit must be 120V-60Hz.
Dimming
Use only dimmers specifically designed for use with electronic transformers.
Low voltage fixtures may produce audible sound when dimmed.
Finish
All painted finishes baked enamel.
Labels
UL; CUL
Catalog No.
Finishes
Mounting
Use With
8611EWH
Matte White
To 4" Octagonal
Lytedrop or Focal Jack Luminaires
8611EBK
Matte Black
Outlet Box
50W Max.
8611EAL
Aluminum
Ceiling Mount
8611E
