Lightolier
45 INDUSTRIAL WAY, WILMINGTON, MA 01887
LYTECEL LINEAR SURFACE/PENDANT AND ELECTRICAL FEED INSTRUCTIONS
NOTE: Fixture should be installed by a qualified electrician. Before installation, see dimensions.
1
Dimensions
Twist-on
Wirenuts
Remove Wireway Cover
to expose Wirenuts
for thru wiring
Wago Plug-in
Wirenuts
Twist-on
Wirenuts
Feed End
Feed End
Remove Wireway Cover
tp expose Wirenuts
for thru wiring
Wago Plug-in
Wirenuts
4'
Unit
8'
Unit
Continuous End
Continuous End
2
Slide Grip Hanger Assembly
End Or Middle of Row
Remove Louver by releasing four Spring-loaded
Latches. Remove Wireway Cover. Remove K.O.s
(2) from top of End Plate and install Slide Grip
Hanger into K.O. openings. Secure Slide Grip
Hanger to Fixture with Screw Provided. Feed
wires through opening in End Plate, into Wireway
Tab
End Cap
Screw Provided
Wireway
Cover
Ball
Chain
Louver
K.O.s
Slide
Grip
Hanger
Screw
Provided
Fixture
Screw
Provided
Screw
Provided
Slide
Grip
Hanger
Fixture
Wago
Plug-ins
8
Surface Mount Direct to Surface Without Slide
Grip Hanger
Insert Flexible Connector with at least 1/2" long
leads into wiring compartment and secure the
Flexible Connector with the Flexible Connector
Locknut. Mount the Fixture to the ceiling with
Mounting Screws (by others) or toggle bolts (not
supplied) through four 7/32" x 9/32" rectangular
holes. Make sure Fixture is mounted firmly and
the ceiling can withstand the weight of the Fixture.
Make electrical connections to Fixture, using twist-
on wirenuts provided. Re-install Wireway Cover,
install lamps (by others). Slip Ball Chain into key
slots in Wireway Cover and Install Louver.
Flexible
Connector
Wiring
Compartment
Flexible
Connector Locknut
Mounting
Screw
7
Assemble Slide Grip Hanger to Fixture as in
Step 2. Bring service leads from Outlet Box
through AC1 and Slide Grip Hanger, securing AC1
and Slide Grip Hanger to Outlet Box.
Outlet Box, Canopy, Slide Grip Hanger
Outlet
Box
© a Genlyte company
59-31135-000
Printed in U.S.A.
AC1
Slide Grip
Hanger
End
Plate
Fixture
K.O.'s (2)
and make wiring connections. If Fixture is to be
used as an individual, or mounting is to be at
joints, assemble Slide Grip Hanger to both ends of
1st Fixture.
Assemble End Cap to Fixture with Screws (2)
Provided at end of row. Install Wireway Cover and
Louver.
Lytecel 6-page Inst. Sht.qxd 2/25/05 4:40 PM Page 1
