Страница 1: ...FOR AllACHING LINEAR TO SINGLE CIRCUITTRACK SYSTEMS 1 Insertinto LYlESPAN TRACK see Fig 1 LOCKINGLEVERmust be on the same side of track as BEAD 2 Rotate FITTING90 clockwiseuntil LOCKINGLEVERsnaps and locks in place see Fig 2 and 3 3 To remove depress LOCKING LEVER then rotate FITTING 90 counterclockwise YTESPANTRACK FITTING FIG 1 FIG 2 FIG 3 INSTRUCTIONSFOR CONVERTINGFITTINGTO OPERATEON 2 BRASSCON...
Страница 2: ...raight out with both hands To remove lamp swing lamp from the end until it snaps out of holding clip then pull sideways until it detaches from the lamp socket see Fig 2 Install new lamp Replam louver by lining up locking tabs to the inside edge of fixture s opening then push louver until it snaps in position See list below for selection of appropriate lamp PROD 12 8276 Twin Tube 18W 14 8277 Twin T...
