INSTRUCTION SHEET
INSTRUCTION SHEET
INSTRUCTION SHEET
INSTRUCTION SHEET
INSTRUCTION SHEET
04-05/Rev-03
IS:SL110A
INSTRUCTION FOR INSTALLATION KUBIK LIGHT
LINEAR FLUORESCENT LUMINAIRE
A. POWER SUPPLY:
1. Follow the instructions sheet on the appropriate power
supply. (
See series ISSL003)
B. COVER: (if required)
1. Carefully pull the
lamp holder housing
out from the
channel.
(Fig.1)
2. Insert the end of a small slot
screwdriver
into the
slot.
(Fig.2)
3. Lift the
cover
gently all along the
channel
. (Fig.2)
4. Ajust
ball plunger
pressure as needed. (Fig.4)
To reinstall the cover
1. Align one end of the
cover
with the
block
in the
channel
.
(Fig.3)
2. Press the
cover
along the length of
channel
. (Fig.3)
C. DIRECTION:
1. Follow the instructions Sheet No. ISSL003H.
D. L A M P :
(does not apply to the extended blank model no. SL003F)
2" and 2-3/4" model
1. Carefully pull the
lamp holder housing
out of the
channel
.
(Fig.1)
2. Align the
pins
of the
lamp
with the
lamp holder(s),
and
push in until they click. (Fig.5)
13-7/8" model
1. Align the
pins
of the
lamp
with the
lamp holder,
and push
in until they click. (Fig.6)
2. Gently push the
stem
outward and align the of the
lamp
with the
lamp holder,
and push together until they
click. (Fig.6)
Linear fluorescent lamp T5 miniature, BI-PIN base
LAMP
HOLDER
FIG.1
CHANNEL
FIG.2
COVER
SCREWDRIVER
CHANNEL
SLOT
COVER
CHANNEL
BLOCK
FIG.3
LAMP
HOLDER
PINS
LAMP
LAMP
HOLDER
STEM
PINS
LAMP
LAMP HOLDER
FIG.5
FIG.6
BLANK EXTENSION
BALL
LOCK
FIG.4
