5
6
7
9
11
12 13
1
4
10 3/8" L X 10" W
5" L X 5" W Opening
8 3/4"
Depth
2 3
13"
13 1/8"
17"
5"
8
10
14
1 3/4"
8"
Top View
Ceiling Cutout: 6 3/16"L x 6 3/16"W
Ordering Information: MR 16 Series A
Cat. No.
Lamp
Ceiling Trim
Aperture Finish
PA1M167EBL
(1) 75W MR 16*
Overlap
Black with White Flange
PA1M167EWL
(1) 75W MR 16*
Overlap
White with White Flange
PA1M167EBTL
(1) 75W MR 16*
Trimless
Black
PA1M167EWTL
(1) 75W MR 16*
Trimless
White
*50W max. lamping when using accessories
PA1M167EBL
= (Flanged) Black/White
PA1M167EWL
= (Flanged) White
PA1M167EBTL
= (Trimless) Black
PA1M167EWTL
= (Trimless) White
Flanged
Trimless
Calculite
®
ProSpec
®
Linear Downlight
PA1M1675
Page 1 of 2
1 Light MR 16 Series A
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Thomas Group LLC (Lightolier Division) • C0711
Features
1. Aperture Frame:
Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge:
Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-cast aluminum.
3. Cross Blade Louver:
Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring:
Allows 360° horizontal and 35° (on width) and 45° (on
diagonal) vertical adjustment.
5. Tortiontite Spring:
For easy installation of aperture frame.
6. Housing:
Die-formed 22 ga. steel. Finish: Black.
7. Mounting Brackets:
Adjustable vertically from outside of housing.
8. Thermal Protector:
Meets NEC, UL & CSA requirements.
9. Lampholder:
Steatite for GX/GY 5.3 Bi-Pin lamps. 250°C Teflon
®
leads.
10. Junction Box:
14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
below.
11. Lamp and Accessory Support:
.032" steel, flared for easy entry of
Media Cartridge.
12. Lens Retaining Ring:
.093" spring steel rod. Holds accessories in place.
13. Lamp Guard:
Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing:
Die-formed 18 ga. steel.
Electrical
Electronic Transformers:
Offer reliable operation and are accessible from
below for servicing. 12V Secondary 75 VA. each lamp.
Dimming Controls:
Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL/cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90°C.
Finish
All painted finishes are powder coated baked enamel.
Options and Accessories
Accessories:
2 1/2" dia. series, filters, lenses, screens and louvers, (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon
®
is a registered trademark of E.I. DuPont.
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
