Calculite Matrix HID Lensed Adj. Accent
C4X4MRW
Page 1 of 2
4½" X 4½" Square Aperture (1) 20W CMH MR16
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • D0711
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Ordering Information
Frame-In Kits
Reflector Trims
Finish/Flange
Lamp
C4X420MREU
Electronic 120/277V
C4X4MRWCLW
C4X4MRWCLP
C4X4MRWCCLW
C4X4MRWCCLP
C4X4MRWCCDW
C4X4MRWCCDP
C4X4MRWWHW
Specular Clear/White
Specular Clear/Polished
Comfort Clear/White
Comfort Clear/Polished
Comfort Clear Diffuse/White
Comfort Clear Diffuse/Polished
White/White
(1) 20W MR16 CMH GX10 Base
Ceiling Cutout: 5 1/4" x 5 1/4" (130 mm x 130mm) Dia.
8.16"
9.66"
8"
9.66"
2"
Max. Ceiling
Thickness
5.75"
4.5"
Features
1. Reflector Trim:
55° physical and reflected cutoff. Available with integral
flange painted white or polished to match inside of cone.
2. Lamp Holder/Trim Adjustment Assembly:
Unitized optics ensure
alignment of lamp and aperture cone regardless of ceiling thickness. EZ
Aim™ gear-driven adjustment features an optimized lamp path to maximize
light output at tilt angles up to 45°. Aiming indicator ensures accurate
lamp positioning. Solite lens ships standard. Adjust trim kit vertically to
accommodate up to 2" thick ceiling.
3. Socket:
Twist and lock base. 5kV (600V) pulse rated PPS, black T240 body
socket with nickel-plated contacts. 18 AWG silicone leads with fiberglass
outer sleeve.
4. Frame Housing:
Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top relamping.
5. Frame Vertical Adjustment Mechanism:
Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or ½" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside the fixture.
6. Mounting Bars:
Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
7. Retention Springs:
Rust resistant springs secure trim for quick, tool-less
installation.
8. Ballast/Cover Assembly:
Accessible from below and removable without
tools for inspection and ballast replacement.
9. Junction Box:
0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
Features
(continued)
10. Thermal Protector:
Meets NEC and UL requirements. Do not install
insulation above nor within 3" (76mm) of any part of the luminaire.
11. Electronic Ballast:
120 or 277V, 50/60 Hz., encased, high power factor
>0.99, THD <10%, thermally and transient protected, RMI/RFI complies with
FCC Part 18 non-consumer limits, shut-down at end of lamp life, sound rating
“A", Minimum starting temperature -30°, Type 1 Outdoor rating.
Ballast
ANSI Code Voltage Max. Amps Input Watts
20W MH
M156
120/277V
0.20/0.09
22
Options and Accessories
Accepts one optical accessory
2" diameter color filter/specialty filter: ADF2/AF2
2" diameter louver: AL2HC
Labels
UL, cUL (Suitable For Wet Locations)
