9
2
Vertical Adjustment:
5/8" (16 mm) to
2 7/8" (73 mm)
5
4
9
10
7
2" (50 mm) max.
Ceiling Thickness
7-3/8" (187 mm) Dia.
3
1
6
8
8-5/8" (200 mm) Dia.
11-7/8"
(301 mm)
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Upper Reflector:
Clear anodized aluminum, 0.040" (16-ga.). Provides wide
beam distribution.
2. Aperture Cone:
Provides 50° visual cut-off to lamp and lamp image;
self-flange in painted white or aperture-matching polished flange. Consult
factory for other finishes.
3. Socket Cup:
Galvanized steel, pre-wired with medium base pulse rated
socket. Snaps onto upper reflector for secure attachment without tools; uni-
tized construction assures proper lamp alignment to optics for consistent
performance.
4. Mounting Ring:
0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below. For ceiling from 0" to 2" thick. Center line
notches allow consistent alignment of multiple fixtures.
5. Mounting Frame:
0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
6. Aperture Cone Retention Springs:
Rust resistant springs secure cone in
place for quick, tool-less installation.
7. Frame Vertical Adjustment Mechanism:
Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
8. Mounting Bars:
0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies instal-
lation in 24" O.C. grid systems. Attaches to steel or wood joists without acces-
sories.
9. Ballast:
Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
10.Junction Box:
0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
11.Thermal Protector:
(Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast:
120 or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”,
-5°F minimum starting temperature, Type 1 Outdoor rating.
Electrical (cont.)
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M139
120/277
0.67/0.29
78
100W MH M90/M140
120/277
0.90/0.43
110
150MH
M102
120/277
1.40/0.61
167
Magnetic Ballast:
120/277V dual voltage, 60 Hz., encased and potted, HX-HPF
circuit type, high power factor, sound rating "B", -20°F minimum starting
temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M143
120/277
1.90/0.80
94
100W MH M90/M140
120/277
2.40/1.10
125
150MH
M102
120/277
3.70/1.60
180
Options and Accessories
Auxiliary:
Add suffix
A
to Frame-In Kit and Reflector Trim. See Spec. Sheet "A/E"
Emergency Lamp:
Add suffix
E
to Frame-In Kit and Reflector Trim. See Spec.
Sheet "A/E"
Slope Ceiling Adapters:
See Specification Sheet SCA.
Fuse
(magnetic ballast): Add suffix
F1 or F2
to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum:
Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W. For 150W, install fixtures with
minimum spacing: 3 feet from center-to-center of adjacent luminaries; 3 inch from
top of luminaire to overhead building member;1 1/2 feet from luminaire center to
side building member.
Ceiling Cutout:
8" (203 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
(Coated, Ceramic MH)
C7E170VW CLW
Specular Clear, White Painted Flange.
C770MHOE1
Electronic 120V /
C770MHOE2
Electronic 277V 70W E17, ED17, BD17 (Open Rated)
CLP
Specular Clear, Matching Flange.
C710MHOE1
Electronic 120V /
C710MHOE2
Electronic 277V 100W E17, ED17, BD17 (Open Rated)
CCDW
Comfort Clear Diffuse, White Painted Flange.
C715MHOE1
Electronic 120V /
C715MHOE2
Electronic 277V 150W E17, ED17, BD17 (Open Rated)
CCDP
Comfort Clear Diffuse, Matching Flange.
C770MHOU
Magnetic 120V/277V
70W E17, ED17, BD17 (Open Rated)
CCZW
Champagne Bronze, White Painted Flange.
C710MHOU
Magnetic 120V/277V
100W E17, ED17, BD17 (Open Rated)
CCZP
Champagne Bronze, Matching Flange.
C715MHOU
Magnetic 120V/277V
150W E17, ED17, BD17 (Open Rated)
Top View
(Magnetic Ballast)
18-5/8" (473 mm)
10-7/8"
(276 mm)
10-1/2"
(267 mm)
8-1/4"
(210 mm)
20" (508 mm) to 30" (762 mm)
9-3/4"
(248 mm)
Top View
(Electronic Ballast)
10-7/8"
(276 mm)
9-3/4"
(248 mm)
20" (508 mm) to
30" (762 mm)
11" (280 mm)
(100/150W)
Calculite
®
HID Downlight
C7E170VW
Page 1 of 2
7" Aperture, ED17 (Open Rated) Ceramic Metal Halide, Wide Beam
