Calculite
®
HID Downlight
C6P30MH
Page 1 of 2
6” Aperture, PAR30 Ceramic MH
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Reflector Trim:
Clear anodized aluminum, 0.040” (16-ga.). Provides 45° visu-
al cut-off to lamp and lamp image; self-flange painted white or polished
flange. Consult factory for other finishes.
2. Socket Cup:
Galvanized steel pre-wired with medium base pulse rated sock-
et. Snaps onto upper reflector for secure attachment without tools; assures
proper lamp alignment to optics for consistent performance.
3. Mounting Frame:
0.048" (18-ga.) galvanized steel includes pre-installed
mounting bars.
4. Mounting Ring:
0.048" (18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
5. Retention Springs:
Rust resistant springs secure reflector in place for quick,
tool-less installation.
6. Frame Vertical Adjustment Mechanism:
Vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation.
7. Mounting Bars:
0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"
long and lock securely into position. Built-in locking tabs provide positive
attachment to common T-bar systems. Self-centering feature simplifies
installation in 24" O.C. grid systems. Attaches to steel or wood joists without
accessories.
8. Ballast:
Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).
Accessible from below for inspection and/or replacement without tools.
9. Junction Box:
0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors; allows inspection from below.
10. Thermal Protector:
(Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast:
120V or 277V, 50/60 Hz., encased, high-power factor, T.H.D.
<15%, thermally and transient protected, RMI / RFI complies with FCC Part 18
non-consumer equipment, shut-down circuit at end of lamp life, sound rating
"A", -5°F minimum starting temperature, Type 1 outdoor rating.
Electrical (cont.)
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
39W MH
M130
120/277
0.39/0.17
44
70W MH
M98/M143
120/277
0.67/0.28
78
Magnetic Ballast:
120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum
starting temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
39W MH
M130
120/277
1.90/0.80
94
70W MH
M139
120/277
2.40/1.10
125
Options and Accessories
Slope Ceiling Adapters:
See Specification Sheet SCA.
Fuse
(magnetic ballast)
B1
Add suffix
F1
or
F2
to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum:
Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
Ceiling Cutout:
6 9/16” (167 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
C6P3OMH CLW
Specular Clear, White Painted Flange.
CLP
Specular Clear, Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C639MHE1
Electronic 120V
39W PAR30
Ceramic Metal Halide
C639MHE2
Electronic 277V
39W PAR30
Ceramic Metal Halide
C670MHE1
Electronic 120V
70W PAR30
Ceramic Metal Halide
C670MHE2
Electronic 277V
70W PAR30
Ceramic Metal Halide
C639MHU
Magnetic 120V/277V
39W PAR30
Ceramic Metal Halide
C670MHU
Magnetic 120V/277V
70W PAR30
Ceramic Metal Halide
