Lytecaster Recessed Downlighting
1000AICM
Page 1 of 1
5" Aperture Incandescent Insulated Ceiling, AirSeal Frame-In Kit
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • G0810
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Recessed
Satin
Basic
Enclosed Open
Wall
Reflector Cone
Cone
Baffles
White
Adjustable
Eyeball
Diffusers Wet Location Washer
1000AICM
1045
1012
1008
1005
1071
1027
1029
1022
1021
1084CD
1035
1046
1012NM
1008NM 1005NM
1027CD
1029CD
1022WH 1024
1084WH
1035WH
1046CD
1013
1010
1005BNM
1027NM
1029NM
1082
1090
1085
1013CD
1010NM 1005WH
1027CDNM 1029CDNM
1013BK
1076
1027BKNM 1029BKNM
1013WH
1076WH
1027WH
1029GDNM
1013NM
1038
1029CLNM
1013CDNM
1038NM
1029CL
1013BKNM
1048
1029GD
1048NM
1029BK
1029BNM 1029WH
Features
1. Housing:
.026" (#20 ga.) galvanized steel. U.L. listed for direct contact with
thermal insulation. AirSeal housing minimizes air leakage to less than 2 CFM at
1.57 psf, which complies with Washington State Energy Code (Section 502.4)
and reduces heat loss and condensation on ceiling. Access door for inspection
of junction box.
2. Mounting Frame:
.036" (#20 ga.) galvanized steel. Accommodates all ceilings
up to 1" thick. 3/8" deep integral lip. Four slots are positioned 90º apart to
simplify alignment. Push-in/twist-out rotoclips hold reflector flush to ceiling.
3. Junction Box:
2" x 4" x 4", .060" (#14 ga.) galvanized steel. U.L. listed for,
maximum of 6 No. 12 ga., 90º C through branch circuit conductors. Quick release
“L” shaped cover for outside access to wiring. Access door inside of housing
allows easy inspection of wiring without removal of housing. Integral cable
clamps permit attachment of nonmetallic Romex
®
or armored cable without the
need for additional connectors.
4. Mounting Bars:
.059" (#16 ga.) galvanized steel. 13" long bars extend to 27",
rotatable and lockable, with integral T-bar tabs.
5. Socket Housing:
Impact extruded aluminum or galvanized steel.
6. Socket:
Porcelain medium base; nickel plated screw shell. Pre-wired with #18
ga. SF1 leads to junction box.
7. Thermal Protector:
Meets NEC and U.L. requirements. Located inside housing
Options & Accessories
Mounting Bars:
1964
- 20" set of (2)
T-Bar Ceiling Clips:
1956
- set of (4)
Extra-Thick Ceiling
Mounting Ring:
1967B
- 1 1/4” to 2" thick ceilings.
277V Remote Step-Down Transformer:
7997
- 277V down to 120V 300W max. load.
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Romex
®
is a registered Trademark of General Cable Industries Inc.
