Lightning SA MultiCom, Руководство пользователя

Страница: 69 / 172

MultiCom Firewall User’s Manual 69
Create New Privileged Administrator
Create New Privileged Administrator
Although the SecureWall firewall is activated by default, blocking access to the
Firewall for configuration from the Internet, it is a good idea to change the default
username of “multicom”.
To change the Administrator Username and Password on the MultiCom Firewall
you will need to use a web browser to goto http://10.0.0.1/advanced/user/create/
(where 10.0.0.1 is the IP address of the LAN interface of the Firewall). Enter in a
new Username and Password and select the User Rights “Privileged” with CLI
Access enabled. When you are finished click “Submit Values”.
When the new “Privileged” user is created, the default user “multicom” is
disabled. This means that only the new user will have the right to configure the
MultiCom Firewall. If you forget your username and password, you will have to
reset the MultiCom Firewall back into its default configuration and reload the
configuration file from a backup copy.
NOTE - When the first new Privileged user is created the multicom
user will be deactivated and you will need to authenticate again using
the new username and password that you created.
The Reference Manual has descriptions of all user and permission options.
Quick Interface Configuration
If you want to make a quick change to an interface’s configuration you will need
to use a web browser to go to the LAN interface (by default http://10.0.0.1).
Select interface from the menu (WAN, LAN, DMZ, DSL, WLAN) and change
the configuration on the following pages. When you are finished you will have
the option to either