DEUTSCH
ENGLISH
FRANCAIS
ESP
AÑOL
16
DEUTSCH
ENGLISH
06. If you have set the DMX address of the dimmer pack, you must make sure that the addresses
are identical to those of the controller.
07 The device now operates as a DMX dimmer. You can adjust the light intensity with your DMX
controller. 0 means no output, 100 is full output.
Connections and control elements:
1
Mode key
toggles between DMX and CHASE mode.
2
Menu key
activates the various functions in DMX and CHASE mode.
3
„Arrow up“-key
increases the value shown in the display.
4
„Arrow down“-key
decreases the value shown in the display.
5
Current outputs
In total 4 outputs DMX and CHASE mode back and forth.
6
Green LEDs
Indicators - light up when the corresponding channel is activated.
7
LCD Display
Multifunction display - serves as a monitor to display current settings.
8
Channel fuse
Each of the 4 channels is protected by a 6.3A fuse. These fuses protect the
device from overload and damage. Make sure to replace the fuses only with
identical fuses.
9
On / off switch
switches the device on or off.
10
power cable
Plug the cable into the unit and a power outlet.
11
DMX input
serves as input for DMX signals.
12
DMX output
is used to output DMX signals and send them to other DMX devices.