Lighthouse a125, Инструкция по установке и эксплуатации

Страница: 98 / 460

6.9 Splitscreen controls
When viewing a page with more than 1 application
displayed you can switch applications from the
splitscreen view to fullscreen view.
Example 1 — Splitscreen page
Example 2 — Fishfinder application expanded
to Fullscreen
Selecting the active window
When viewing a splitscreen page you can select the
active application and view it fullscreen by following
the steps below.
With a page featuring multiple applications displayed:
1. Touch anywhere inside the application you want
to make active.
A border appears around the application,
indicating that it is active.
2. Select Menu .
3. Select Fullscreen to view the active application
in fullscreen, or
4. Select Splitscreen to return to the splitscreen
view.
Selecting the active window using
Non-touch controls
When viewing a splitscreen page you can select the
active application and view it fullscreen using the
MFD’s physical buttons or a remote keypad.
With a page featuring multiple applications displayed:
1. Press the Switch Active button.
The active pane pop up is displayed:
2. Press the Switch Active Pane button or use the
Rotary control to cycle the active application.
3. Use the Range in or Range out controls to
switch the active application between splitscreen
and fullscreen views.
Selecting the active window — e7 / e7D
When viewing a splitscreen page you can select the
active application and view it fullscreen on an e7 /
e7D with the touch lock enabled by following the
steps below.
With a page featuring multiple applications displayed:
1. Press the
Menu button.
2. Select Cycle application .
Selecting cycle application cycles through the
available applications.
3. Select Fullscreen to view the active application
in fullscreen, or
4. Select Splitscreen to return to the splitscreen
view.
Switching the active pane or display using
the keypad
The Switch Active button is used to switch the active
pane on a multi application page and / or to switch
the active display.
With multiple displays connected and / or multiple
application page(s) displayed:
Cycle sequence
D12880-1
2 3
4
1
5
1. Press the Switch Active button to enter switch
mode.
2. Use the Rotary control to cycle through the
available panes and / or displays.
The keypad will cycle through displays in the
order in which they were paired. On multi
application pages the Range buttons can be used
to switch the active application between full and
splitscreen.
3. Press the Back button or the Switch Active
button to exit switch mode.
98 a Series / c Series / e Series