Lighthouse a125 Скачать руководство пользователя

Страница: 298 / 460

Interfer-
ence re-
jection
off

Interfer-
ence re-
jection
on

20.5 Target tracking

The

Guard Zone

VRM/EBL

and

MARPA

functions

will help you track targets and avoid collisions.
With a radar connected to your multifunction display,
you can:

• Assess how far away a target is and its bearing

(VRM/EBL).

• Set an alarm to trigger when a target is within a

specified zone (Guard Zone).

• Display detailed information on tracked targets

(MARPA).

• Display the range and bearing of a target.

Setting up a radar guard zone

From the radar application:
1. Select

Menu

2. Select

Zones

3. Select

Guard Zone

so that On is highlighted.

Selecting Guard Zone will switch the zone On
and Off.

4. Select

Guard Zone Set-up

5. Select

Shape:

to switch between Sector or

Circle.

6. Select

Outer:

The Outer numeric adjust control is displayed.

7. Adjust the outer edge of the guard zone to the

required distance.

8. Select

to close the numeric adjust control.

9. Select

Inner:

The Inner numeric adjust control is displayed.

10. Adjust the inner edge of the guard zone to the

required distance.

11. Select

to close the numeric adjust control.

12. Select

Width:

The Width numeric adjust control is displayed.

13. Adjust the width of the guard zone in degrees.
14. Select

to close the numeric adjust control.

15. Select

Bearing:

The Bearing numeric adjust control is displayed.

16. Adjust the bearing of the guard zone in degrees

port or degrees starboard.

17. Select

to close the numeric adjust control.

Note:

Guard zone width and bearing can only be

adjusted when the

Shape:

is set to Sector.

Guard zone context menu

The guard zone function includes a context menu
which provides additional menu items.

The context menu provides the following menu items:

•

Acquire Target.

298

a Series / c Series / e Series

Содержание a125













































































































































































































































































































































































































































































Результаты поиска

Содержание a125

Отзывы:

Похожие инструкции для a125

Бренды по названию

Популярные бренды

Lighthouse a125, Инструкция по установке и эксплуатации

Результаты поиска

Содержание a125

Отзывы:

Похожие инструкции для a125

Бренды по названию

Популярные бренды