Lighthouse a125 Скачать руководство пользователя

Страница: 200 / 460

16.4 Enabling AIS

Enabling AIS in the Chart application

To enable the AIS overlay in the Chart application
follow the steps below.

To enable the AIS overlay your system must include
an AIS receiver or transceiver. The AIS overlay is
not available in 3D view.

From the Chart application menu:
1. Select

Presentation

2. Select

Overlays

3. Select

AIS:

so that On is selected.

Selecting AIS: switches the AIS between On and
Off.

For AIS information refer to

Chapter 16 AIS function

Enabling AIS in the radar application

From the radar application:
1. Select

Menu

2. Select

Targets

3. Select

Display AIS Targets

4. Select the relevant option from the list.

From the

Display AIS Targets

menu you can

switch on

All

AIS targets, only

Dangerous

AIS

targets or switch AIS targets

Off

16.5 Displaying AIS vectors

You must have the correct data available before AIS
vectors can be displayed.

A target is defined as active when it has the following
data displayed graphically:

• A COG/SOG vector indicating the predicted

distance that a target will travel within a given
period of time.

• A heading and direction of turn indicator.

Enabling and disabling AIS vectors

From the chart or radar application:
1. Select an AIS target.

The AIS target context menu is displayed.

2. Select

AIS Vector

Selecting AIS Vector will switch between On and
Off.

Note:

The same target vector and safe zone

settings apply to both radar MARPA and AIS
targets.

200

a Series / c Series / e Series

Содержание a125













































































































































































































































































































































































































































































Результаты поиска

Содержание a125

Отзывы:

Похожие инструкции для a125

Бренды по названию

Популярные бренды

Lighthouse a125, Инструкция по установке и эксплуатации

Результаты поиска

Содержание a125

Отзывы:

Похожие инструкции для a125

Бренды по названию

Популярные бренды