Lighthouse a125, Инструкция по установке и эксплуатации

Страница: 149 / 460

Ground trip resets menu
This menu enables you to resets the chosen ground trip distance counter to zero.
Menu item Description
Ground Trip 1 Reset Resets the ground trip 1 distance counter to zero.
Ground Trip 2 Reset Resets the ground trip 2 distance counter to zero.
Ground Trip 3 Reset Resets the ground trip 3 distance counter to zero.
Ground Trip 4 Reset Resets the ground trip 4 distance counter to zero.
System settings menu
Menu item Description Options
Autopilot
Control Enables and
disables autopilot
controls from
your multifunction
display.
• On
• Off
DSC Alerts Enables and
disables DSC
radio alerts on
your multifunction
display. • On
• Off
GPS Set-up Provides GPS
setting options. • View Satellite
Status
• Differential GPS
• COG/SOG Filter
• Restart GPS
Internal GPS Switches the
multifunction
displays internal
GPS On or Off.
Note: The
Internal GPS
option is not
available on
the e165
multifunction
display.
• On
• Off
Data Sources Enables selection of
preferred sources of
data for connected
equipment.
Note: The Data
Sources menu is
only available on
displays set as
Data Master.
• GPS
• GPS Datum
• Time and Date
• Heading
• Depth
• Speed
• Wind
External
Devices Enables set-up
of compatible
externally
connected devices. Refer to the
External devices
menu
section of the
manual.
Wireless
Connections Provides access
to the Wi-Fi
and bluetooth
connection options. Refer to
the
Wireless
connections menu
section of the
manual.
Menu item Description Options
NMEA Set-up Enables you to
configure settings
for NMEA devices. Refer to the NMEA
set-up menu section
of the manual.
System
Preferences Enables you to
configure system
settings Refer to the System
preferences menu
section of the
manual.
Simulator Switches simulator
mode On or Off. • Off
• On
• On (Demo
movie)
GPS Status
The GPS status page enables you to view the status
of the available satellites that are compatible with
your receiver.
The satellite constellations are used to position your
vessel in the Chart and Weather applications. You
can set up your receiver and check its status from
the GPS Set-up menu:
Homescreen > Set-up >
System Settings > GPS Set-up . For each satellite,
the screen provides the following information:
1
2
3
D13122-1
1. Sky view
2. Satellite status
3. Position and fix information
Sky view
Sky view is a visual representation that shows
the position of navigation satellites and their type.
Satellite types are:
• Circle — A circle identifies a satellite from the
GPS constellation.
• * Diamond — A diamond identifies a satellite from
the GLONASS constellation.
• Square — A square identifies an (SBAS)
differential satellite.
Customizing your display
149