Contents
Safety instructions and precautions
Installation
Operation
Cleaning and maintenance
Service
Guarantee
Safety instructions and precautions
• Never look directly into the beam or shine in anyone’s eyes.
• Do not block the ventilation inlet or outlets on the unit.
• Ensure that there is sufficient ventilation around the unit, recommended minimum 1m².
• This product is designed for indoor use only and should not come into contact with water or excessive
dust.
• No user serviceable parts inside.
• Use only approved accessories.
• Do not use this device in the presence of flammable or oxygen rich atmospheres.
• To prevent injury, this apparatus must be securely attached to the ceiling/wall.
Distance
Diameter
4m
3m
2m
1m
0.30m
0.60m
0.90m
1.20m
17°
Installation
Prior to mounting the unit please refer to the distance/spot size chart to achieve the required image size.
Diagrams show the full width half peak Beam Angle.
Fix the projector to the mounting bracket or Track Adapter. Check locknut is fitted to threaded end of
Mount Arm. Place washer over end of mount arm and screw into the Projector. Orientate project as
required and tighten locknut against Projector until tight.
Distance
Diameter
4m
3m
2m
1m
0.35m
0.70m
1.05m
1.40m
20°
12Vdc
EVICA EP10 12VDC LED EFFECTS PROJECTOR
Light Projects 23 Jacob St London SE1 2BG Tel +44 (0)20 7231 8282
Website www.lightprojects.co.uk Email [email protected]
pg 1