Light Bright
Synjax Zoom 40
11. Service and cleaning
WARNING: Disconnect the device from the power supply before opening
it!
You should check the function of the fans in the head and base at regular intervals. Above all,
you should make sure that the air inlets and the inside of the headlight are free of lint and
dust.
To do this, open the head cover and the base plate at the foot. You can clean the headlight
with a brush/cleaning cloth and a vacuum cleaner or compressor (only at low speed).
Make sure that you do not bend or damage any parts during cleaning. After cleaning is
complete, close all covers again with the associated screws and perform a function test.
Please use only lint-free, clean cleaning cloths or brushes and cleaning agents without
alcohol to clean your device. We recommend regular cleaning at least every three months.
Look for damage to the device, parts of the device and connection cables. If you notice any
damage, DO NOT use the device and take it to an authorized dealer to eliminate any danger
from using defective equipment and to have your device professionally repaired.
18
