
USER MANUAL
–
EASYLIFT V3 PLUS
–
GB VERSION 2.1
Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
18
10.6
ON/OFF switch
The lift comes fitted with an ON/OFF switch. It is sited below the main board on the right-hand
side of the lift. You need to remove the cover to access the switch. This button is used to
disconnect the power supply to the lift. If the user switches this off at the same time as activating
emergency stop, the lift will be completely powered off.
The ON/OFF switch is used in the pairing of wireless call stations (see section 13). Power to
the lift is switched on/off by activating the ON/OFF switch and the emergency stop (see section
11.1). When power is again returned to the lift (and emergency stop is released), the control
system restarts (see section 11.2).
WARNING!
The ON/OFF switch is for the battery charger. It is not the mains
switch. If it set to OFF for a longer period of time, it may drain and damage the
batteries on primary side.