background image

O�������

������ ����

������

LAUVR1

U��������

R�����

STEP 1.1

:

Place existing working remote and Liftaway

Universal Remote on flat surface, 2-3cm away,

making sure the top ends of each remote

face each other.

STEP 1.2

:

Press and hold the top left button on LAUVR1

Universal Remote. While continuing to hold

top left button press top right button 4 times,

then release all buttons. (this will put LAUVR1

Universal Remote into learn mode, the red

L.E.D will flash)

STEP 1.3

:

Press and hold the operating button on

existing working remote (one of the

generic remotes above) you wish to

clone for 3-8 seconds

STEP 1.4

:

Check the red LED on LAUVR1, once LED

illuminates continuously then begins to

flash rapidly - this indicates code has been

cloned successfully.

* Note: with simple coded remotes the red

LED will just flash rapidly immediately, either

result is acceptable.

STEP 1.5

:

Press the button on LAUVR1 that you wish

to assign to operate your garage/gate motor.

The red LED will now go out indicating

operation complete. Your remote is now

successfully cloned and is ready to link to

your garage/gate motor.

CLONING YOUR EXISTING REMOTE

STEP 1:

2 - 3 cm

FLASH

HOLD

PRESS 4 TIMES

HOLD FOR

3 - 8 SECONDS

FLASHING RAPIDLY

MEANS THE CODE

HAS BEEN COPIED

1

2

3

4

Отзывы: