Lift-Rite,
Tel:
Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1234959D ©2022 Dated 14 Sep 2022
5
SYSTEM SETUP
Mounting the Pump Handle
1.
Make sure the lever is pushed down to
the “pump” position.
2.
Thread the chain through the hole in the
triangle and through the hole in the axle.
3.
Place the handle bar onto the triangle
and insert the bolts.
4.
Tighten the bolts firmly.
5.
Push the silver part “A” on the outside of
the pump downwards.
6.
At the same time; insert the chain into
the open side of the slot “B” on the
inside of the pump.
