manualshive.com logo in svg

Lifetime #7525, Инструкция по сборке и руководство пользователя, Страница: 1 / 17

Поделиться
Скачать
Lifetime #7525 Скачать руководство пользователя страница 1

**U.S. and Canada customers ONLY**

IF ASSISTANCE IS NEEDED,

DO NOT CONTACT THE STORE!!!

CALL OUR CUSTOMER SERVICE DEPARTMENT 

at 

1 (800) 225-3865

HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)

**Call or visit our Web site for Saturday hours**

**For customers outside the U.S. or Canada, please contact the store for assistance.**

8/28/2007

COMPETITION SERIES XL POWER 

LIFT

®

 BASKETBALL SYSTEM

MODEL #7525

ASSEMBLY INSTRUCTIONS 

AND OWNER’S MANUAL

Save this instruction in the event that the manufacturer has to be contacted for replacement parts.

WARNING

Failure to comply with any of the warnings 

in these instructions may result in serious 

personal  injuries  such  as  cuts,  broken 

bones,  nerve  damage,  paralysis,  brain 

injury,  or  death.    Failure  to  comply  may 

also  result  in  property  damage.  Please 

heed all warnings and cautions. To ensure 

your safety, do not attempt to assemble this 

system  without  reading  and  following 

all

 

instructions carefully. Identify and inventory 

the parts using the Parts List.

INSTRUCTION #07998 D

   

**A MINIMUM OF TWO ADULTS ARE 

REQUIRED FOR ASSEMBLY**

®

WWW.LIFETIME.COM

Copy

Содержание #7525


















Отзывы:

Нет отзывов