Siren Detector Model SDC1001
The Siren Detector must be mounted within 3 inches from a Ha zard Detector (smo ke or fire or CO detector) using
double-faced adhesive or drywall anchors (provided). The Siren Detector attaches only one way to the mounting
plate. Orient mounting plate as shown below. Mic rophone holes must point towards the Hazard Detector.
Use your Console or LifeShie ld Android app to add the Siren Detector. Navigate to Sensors -> Add Sensor -> Siren
Detector.
1)
When the prompt “Press button on Siren Detector” appears, insert the battery (with correct pola rity) into
the Siren Detector within 30 seconds . If you previously inserted the battery, remove the battery, wait 10
seconds, then re-insert.
2)
The system will “find” the Siren Detector. You will ne xt be pro mpted to “Press button on Hazard
Detector”. You will have 90 seconds after the system finds the detector to complete the next 2 steps.
3)
Attach the Siren Detector to the mounting plate being certain that the microphone holes are oriented
towards the Hazard Detector.
4)
Press and hold the test button on your Hazard Detector long enough to cause the siren to sound. This is a
required test, and the Siren Detector must successfully hear the siren. The system will report “Siren
Detector Added” when complete.
5)
You may edit the na me. You must select the type of Haza rd Detector ass ociated with the Siren Detector
(fire, CO, or both).
The “Add” process will not complete if the test is not successful. If the test fails, remove the battery fro m the Siren
Detector and repeat the above process. The battery must be installed within 30 seconds of the prompt “Press button
on Siren Detector” and the Hazard Detector must be sounded within 90 seconds of the Siren Detector being found
by the system. If a fter a second attempt the Siren Detector is still not added to the system other like ly causes are :
- Siren sound from the Ha zard Detector is not loud enough because the Siren Detector is more than 3 inches
fro m the Haza rd Detector
- Ha za rd Detector battery is low so the sound is not loud enough
- Ha za rd Detector is an older technology and is not compatible with the Siren Detector
Note battery
polarity, + on left
Mounting holes point
towards Hazard
Detector. Note text
orientation on base
Microphone holes
towards Hazard
Detector
