10
2. Seat Post, Seat Cushion, Seat Sliding Tube, and Seat Sliding Tube Covers
Installation
Slide the Seat Post Cover (32) onto the tube of the Main Frame (48). Insert the Seat Post
(31) into the
Seat Post Bushing (34) on the tube of the Main Frame (48) and then attach the
Seat Height Adjustment Knob (33) onto the tube of the Main Frame (48) by turning it in a
clockwise direction with Multi Hex Tool provided to lock the Seat Post (31) in the suitable
position.
Remove three M8 Nylon Nuts (25) and three Ø16xØ8x1.5t Washers (26) from underside of
the Seat Cushion (23). Remove nylon nuts and washers with the Multi Hex Tool with
Phillips Screwdriver provided. Guide bolts on underside of the Seat Cushion (23) through
holes on top of the Seat Sliding Tube (76), attach with three removed M8 Nylon Nuts (25)
and Ø16xØ8x1.5t Washers (26). Tighten nylon nuts and washers with the Multi Hex Tool
with Phillips Screwdriver provided. Remove the Ø8xØ20x2.0t Big Washer (29) and Seat
Adjustment Knob (30) from the Seat Sliding Tube Bolt (28). Guide the Seat Sliding Tube
Bolt (28) on underside of the Seat Sliding Tube (76) through hole on top of the Seat Post
(31), attach with the Ø8xØ20x2.0t Big Washer (29) and Seat Adjustment Knob (30) that
were removed.
Attach the Left and Right Seat Sliding Tube Covers (22L, 22R) onto the Seat Sliding Tube
(76) and Seat Post (31) with five ST2.9x16 Cross Recessed Pan Head Tapping Screws (27)
and two ST4.2x20 Cross Recessed Pan Head Tapping Screws (7). Tighten screws with
the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
(7) Cross Recessed Pan Head
Tapping Screw ST4.2x20
2 PCS
(27) Cross Recessed Pan Head
Tapping Screw ST2.9x16
5 PCS
Multi Hex Tool
S10, S13, S17, S19
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
22L
7
22R
7
27
76
25
26
29
31
23
30
33
32
34
48
28
