background image

 

www.lifebreath.com

 

 

 

 30

 

20

 

W

ARRANTY

 

AIRIA BRANDS INC.® (AIRIA) warrants to the original purchaser of the LIFEBREATH® model and accessories 

referred to below, to be free from manufacturing defects. 

 

This Limited Warranty is personal to AIRIA® and is in effect from the installation date, but no later than 12 

months after the date the product was manufactured (if the installation date cannot be verified, the warranty 

period will begin on the date of manufacture). The serial number can be used to determine the date of 

manufacture: XX XX MMDDYY ###; or MMDDYY ###. The warranty is dependent on the type of unit:  

 

Type of Unit 

Warranty 

HRV Residential 

Lifetime on the Core / 5 years on other components 

HRV Commercial 

15 years on the Core / 2 years on other components 

ERV Residential 

5 years on the Core / 5 years on other components 

ERV Commercial 

5 years on the Core / 2 years on other components 

Accessories (e.g. controls and timers) 

1 year 

Replacement Parts (e.g. motor) 

1 year 

Clean Air Furnace (HRV) 

Lifetime on the Core / 2 years on other components 

Clean Air Furnace (ERV) 

5 years on the Core / 2 years on other components 

Air Handler 

5 years 

TFP 

5 years 

 

Damage resulting from all other causes, including but not limited to: lightning, hurricane, tornado, earthquake 

or any other acts of God; improper installation, modification, alteration or misuse of the LIFEBREATH® unit or 

its operation in a manner contrary to the instructions accompanying the unit at the time of sale; accidental or 
intentional damage, neglect, improper care, or other failure by the owner to provide reasonable and necessary 

maintenance of the product; any attempt at repair by an unauthorized service representative or not in 

accordance with this warranty; or any other causes beyond the control of AIRIA®, are excluded from this 

warranty. 

 

If you feel that the LIFEBREATH® unit you purchased is not free from manufacturing defects, please refer to 

https://www.lifebreath.com/homeowners-2/find-a-contractor/ 

to find the name of your nearest dealer in order 

to repair the product. The labour required to install any replacement part(s) is not covered by AIRIA®. 

AIRIA® reserves the right to replace the entire unit or to refund the original purchase price in lieu of repair. 

 

AIRIA® MAKES NO EXPRESS WARRANTIES, EXCEPT FOR THOSE THAT SET FORTH HERIN AND 

SHALL NOT BE LIABLE FOR ANY INDIENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES WITH 

RESPECT TO LIFEBREATH® COVERED BY THIS WARRANTY. AIRIA’S COM

PLETE LIABILITY AND 

THE 

OWNER’S EXCLUSIVE REMEDY BEING LIMITED TO REPAIR OR REPLACEMENT ON THE 

TERMS STATED HEREIN. ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE 

IMPLIED WARRANTY OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE, 

ARE EXPRESSLY EXCLUDED. 

 

NO PERSON IS AUTHORIZED TO CHANGE THE WARRANTY IN ANY WAY OR GRANT ANY OTHER 

WARRANTY UNLESS SUCH CHANGES ARE MADE IN WRITING AND SIGNED BY AN OFFICER OF 

AIRA®. 

 

 
MODEL NO.: ______________________________________________________________  
UNIT SERIAL NO.:  _________________________________________________________  
INSTALLED BY: ____________________________________________________________  
DATE: ___________________________________________________________________  

 

Содержание 350 DGS































Отзывы: